TriGorilla 3D Printer Heating Controller MKS MOSFET for Heatbed Extruder MOS Module

Connect power to power source, please note the anode and cathode 2. Connect digital control signal to Gnd, D8 4. Can use digital signal of 5-24v to control. Connect the control signal of Ramps1. 4 or mks mosfet to -bed+ 5. Specification:1. Extra large heat sink, the maximum current can be up to 30A or more. Can use hot bed output signal of Ramp1.

4 and mks series to control. Connect hotbed to heated wire, please note the anode and cathode 3. Superior performance of MOSFET Max 280A. Choose one signal group to connect Package included: 1 x MOS module Each one will be done functional test.

---

RepRap Champion Y Carriage Plate Upgrade for Wanhao Duplicator i3 and Monoprice Maker Select V1, V2, V2.1 and Plus 3D printers

Surface is brushed and anodized clear. Allows 3 x linear bearing configuration as well as 4 x bearing configuration. We will also publish STL file for the bearing holder similar to stock bearing holder. Has additional provisioning hole for 3 point level adjustment of build surface. Compatible with various aluminum build plates and heated beds, sold in our store.

V2, v2. 1, v2, plus and monoprice Maker Select, V2.1, plus printers. Wahnao i3 / maker select y carriage plate features: Drop in replacement for Wanhao Duplicator i3 and Monoprice Maker Select Brushed, anodized 6061-T6 tempered aluminum alloy plate 3mm thick. This is second revision of Duplicator i3 / Maker Select Y carriage plate.

Material is the same - tempered aluminum alloy 6061-T6. Package contents: 1 x anodized aluminum y carriage plate for Monoprice Maker Select or Wanhao Duplicator i3 Compatible with maker select, V2, wanhao Duplicator i3 versions V1, V2.1 and Plus. Drop in replacement for stock plate on Duplicator i3 and Maker Select V1, V2, V2.

1 and Plus. Second revision plate has hole pattern that fully matches stock plate, we just added weight saving holes and cutouts to make plate lighter. Please note - plate was designed and manufactured strictly to these printer models, it will not work with standard open source prusa i3 due to difference in Y-rod distances 140mm or 150mm on Wanhao and 170mm on Prusa i3.




Similar products:

---

BLTouch : Auto Bed Leveling Sensor / To be a Premium 3D Printer

Thus, bltouch can be applied on almost every board. Bltouch is an auto leveling sensor for 3D Printers based on open-source. Simple, smart, High-precision. It could work with any kinds of bed materials, metals, woods, such as glasses, and so on. Bltouch fulfilled simple structure and high precision by using progressively designed solenoid and hall sensor, alarm release, and aimed user convenience and enjoyable printing by adding many smart functions, self-test, alarm, test mode for M119.

Smart self-test: the push pin is operated three times to test when the power is on Alarm: The LED light blinks if a problem found on a self-test or on an operation - High-precision BLTouch's Standard Deviation in repeatability is around 0005mm, at that precise. Main functions and controls of BLTouch are same as usual auto bed leveling sensor, consists of RC servo and micro switch.

Simple bltouch can be easily applied, since it has a small and simple structure. Compatible with maker select, V2, wanhao Duplicator i3 versions V1, V2.1 and Plus. Drop in replacement for stock plate on Duplicator i3 and Maker Select V1, V2, V2. 1 and Plus. Very stiff, brushed and anodized clear, made of tempered aluminum alloy, no more issues with leveling.




Similar products:

---

Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Wanhao i3

Kit includes: modified thermal Barrier Tube, Modified Plated Nozzle and Slotted Cooling block. With fast extrusion rate, PTFE tube doesn't have enough thermal conductivity to properly melt all the plastic coming out. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum.

Slotted clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. On mk10 extruders that limitation happens around 60 mm/s, depending on nozzle size.

Bltouch is an auto leveling sensor for 3D Printers based on open-source. Simple, smart, High-precision. It could work with any kinds of bed materials, metals, woods, such as glasses, and so on. Fits: wanhao i3, monoprice maker Select 3D Printer v2, Cocoon Create 3D Printer. Very stiff, brushed and anodized clear, made of tempered aluminum alloy, no more issues with leveling.




Similar products:

---

Signstek 3D Printer MK2 MK3 Heated Bed Tempered Borosilicate Glass Plate 2132003mm

Tempered silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. Get you out of the trouble when plastic film decreased viscosity after a period of usage. Size: 213mm x 200mm x 3mm package includes: 1 x smart glass please note: The other products show in the picture are not included! Compatible with maker select, V2, wanhao Duplicator i3 versions V1, V2.

1 and Plus. Drop in replacement for stock plate on Duplicator i3 and Maker Select V1, V2, V2. 1 and Plus. Very stiff, brushed and anodized clear, made of tempered aluminum alloy, no more issues with leveling. Y rod distance supported - from 140mm to 150mm. Material: Silicon glass. Slotted clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer.

. Bltouch is an auto leveling sensor for 3D Printers based on open-source. Simple, smart, High-precision. It could work with any kinds of bed materials, such as glasses, metals, woods, and so on. Fits: wanhao i3, monoprice maker Select 3D Printer v2, Cocoon Create 3D Printer.


Similar products:

---

DC 12V 0.15A 2 Pin Connector Cooling Blower Fan 50mmx15mm for Laptop Black

Firstly, this product of our company are non-waterproof product, it is strictly prohibited using in the water. Made from tempered with high transparence. Total size : 5 x 5 x 1. 5cm /2" x 2" x 06 " l*d*h;outlet size : 2 x1. 5cm/08" x 06"l*w. Bltouch is an auto leveling sensor for 3D Printers based on open-source.

Simple, smart, High-precision. It could work with any kinds of bed materials, metals, such as glasses, woods, and so on. Fits: wanhao i3, monoprice maker Select 3D Printer v2, Cocoon Create 3D Printer. Rated power : DC 12V 015a;connector : 2 terminals power connector improve air flow, low noise, 2-Terminals power connector, cool your CPU when in use, easy thermal heat dissipation, easy to install.

Very stiff, made of tempered aluminum alloy, brushed and anodized clear, no more issues with leveling. Y rod distance supported - from 140mm to 150mm. Package contain : 1 x Laptop Cooling Blower Fan. Thirdly, please do not dismantle the product privately, product working environment is below zero10 Degrees Celsius to 70 Degrees Celsius Fourthly, if you have special needs, please contact us.

Cable length : 12cm/4. 7";mounting spacing : 5.


Similar products:

---

Short Body Nema 17 Bipolar Step Motor 3.5V 1A 18.4oz.in/13Ncm DIY CNC

Short Height. High binding power when heating, easy to separate the plastic parts when cooling. Rated current 1. 0a & resistance 3. 5ohms. Step angle 200 steps/revolution. Material: Silicon glass. Rated power : dc 12v 015a;connector : 2 Terminals Power Connector. Compatible with maker select, V2, wanhao Duplicator i3 versions V1, V2.

1 and Plus. Drop in replacement for stock plate on Duplicator i3 and Maker Select V1, V2, V2. 1 and Plus. Made from tempered with high transparence. Holding torque: 13Ncm18. 4oz. In * rated Current/phase: 1. 0a * phase Resistance: 3. 5ohms * Inductance: 4. 5mh+/-20%1khz physical specification: * frame size: 42 x 42mm * body length: 20mm * Shaft Diameter: 5mm * Shaft Length: 20mm * D-cut Length: 16.

5mm * number of leads: 4 * lead length: 400mm * weight: 140g connection: blacka+, GreenA-, RedB+, BlueB- Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Step angle200 steps/rev. Product name : laptop cooling Blower Fan;Material : Plastic ; Black.




Similar products:

---

URBEST Inlet Module Plug 5A Fuse Switch UR and CE Certification Male Power Socket 10A 250V 3 Pin IEC320 C14

High binding power when heating, easy to separate the plastic parts when cooling. Very stiff, made of tempered aluminum alloy, brushed and anodized clear, no more issues with leveling. Y rod distance supported - from 140mm to 150mm. Short Height. Rated power : dc 12v 015a;connector : 2 Terminals Power Connector.

Product name : laptop cooling Blower Fan;Material : Plastic ; Black. Bltouch is an auto leveling sensor for 3D Printers based on open-source. Simple, smart, High-precision. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on. Fits: wanhao i3, monoprice maker Select 3D Printer v2, Cocoon Create 3D Printer.

Product name : power socket w switch fuse;Material External : Plastic, Silver Tone, Metal;Color : Red, Silver Tone. Weight : 24g;package Content : 1 x Power Socket. Compatible with maker select, wanhao Duplicator i3 versions V1, V2, V2.1 and Plus. Drop in replacement for stock plate on Duplicator i3 and Maker Select V1, V2, V2.

1 and Plus.


Similar products:

---

2pack 50mm x 15mm 5015 12V Dual Ball Bearing DC Brushless Cooling Blower Fan BB5015H12 with 2 Pin Terminal UL TUV

Package content : 2 x DC Brushless Cooling Fan;. Made from tempered with high transparence. Ul tuv approved certification. Bearing type: dual ball bearing, speed: 6000 RPM, Air Flow : 3. 87 cfm;. Nozzle plated with twinclad xt coating hiGH LUBRICITY WEAR RESISTANT. Rated current 1. 0a & resistance 3. 5ohms. Product name : power socket w switch fuse;Material External : Plastic, Silver Tone, Metal;Color : Red, Silver Tone.

Weight : 24g;package Content : 1 x Power Socket. Total size : 5 x 5 x 1. 5cm /2" x 2" x 06 " l*d*h;outlet size : 2 x1. 5cm/08" x 06"l*w. Very stiff, brushed and anodized clear, made of tempered aluminum alloy, no more issues with leveling. Y rod distance supported - from 140mm to 150mm. Connector: 2 terminal Connector with 2pin-ph2.

5;. High binding power when heating, easy to separate the plastic parts when cooling.


Similar products:

---

Gowoops 3D Printer Controller LCD Touch Screen Board, MKS TFT32 3.2'' LCD Display, Suitable for MKS BASE SBASE GEN MINI Board, Cannot Work with Ramps 1.4 and MPCNC

Bltouch is an auto leveling sensor for 3D Printers based on open-source. Simple, smart, High-precision. It could work with any kinds of bed materials, such as glasses, metals, woods, and so on. Fits: wanhao i3, monoprice maker Select 3D Printer v2, Cocoon Create 3D Printer. Bearing type: dual ball bearing, speed: 6000 RPM, Air Flow : 3.

87 cfm;. Slotted clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer. Advantage: long life 50000 hours at 40 degree and Low Noise. Notice: ★mks tft32 do not support external power supply, can't work with Ramps1. 4. The tft doesn't support mpcnc at this time, apple computer will cause error, we are upgrading the firmware★Please download and copy the firmware in a Windows computer, we'll update it in the new versionUser Manual: http://osoyoo.

Com/2016/07/25/mks-tft-2-8-touch-screen/ Other Style Firmware Download: osoyoo. Com/driver/mks%20TFT%20V2. 0%20blue%20+%20Red. Zipmks-tft32 is designed for mks serial board, mks sbase, mks gen, it can work with MKS BASE, MKS MINI, etc. Features:1 3. 2 inch colorful touch screen, support U disk and SD card.


Similar products:

---

BNTECHGO 14 Gauge Silicone Wire 6 feet 3 ft Black And 3 ft Red Soft and Flexible 14 AWG Silicone Wire 400 Strands of copper wire Super low electrical resistance for a highly efficient connection

6 feet total - 3 feet Black and 3 ft Red. Total size : 5. 8 x 4. 8 x 3. 4cm / 2. 3" x 1. 9" x 1. 3"lxwxh;plug type : 3 Pin IEC320 C14. No need to adjust firmware, support Marlin, Smoothieware and Repetier. Material: Silicon glass. Hole center distance : 3. 9cm / 1. 5";bottom size : 4. 7 x 2. 7cm / 1. 9" x 1. 1"lxw; having uR and CE certification.

Temp: -60 degree~+200 degree; Rated Voltage:600V. Rated current 1. 0a & resistance 3. 5ohms. Step angle200 steps/rev. Slotted clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer. Package content : 2 x DC Brushless Cooling Fan;. Short Height. Rated voltage: dc 12v, current: 0

23a 035 max.


Similar products: