Top 9 Washer Shut Off Valve – Faucet Valves

As an Amazon Associate I earn from qualifying purchases.

1. Watts

#ad

Watts 2T-M2 Brass & Tubular Washing Machine Hot Water Shut Off Valve, 1/2"

#ad
Watts #ad - Single lever control shut off valve: Its manual, single control lever controls both hot and cold water simultaneously, shuts off water protecting machine parts and water supply hoses. Inlet adapter fittings allow either 1/2" threaded or 1/2" solder copper x 3/4" washing machine hose threads on hot & cold-water outlets.

Installation: it can be installed in a more convenient spot than old boiler drain type hot and cold-water shutoffs which are often installed in hard to reach places. Water shut off valve for washing machine: these manual washing machine water shutoff valves are used in washing machine applications to manually control water flow and pressure from the hot and cold-water supply piping to the flexible hoses feeding a washing machine.

Washing machine hot water shutoff valve: it prevents the washing machine hoses from bursting preventing water damage in the home. Ball-type designed valve: the ball-type design allows it to be opened to any position to throttle water flow and minimize harmful water hammer and banging pipes caused by fast closing washing machine solenoid valves.
BrandWatts #ad
ManufacturerWatts #ad
Height2.25 Inches
Length1.06 Inches
Weight0.9 Pounds
Width3.56 Inches
Part Number2T-M2
Model2T-M2

2. Dramm

#ad

Dramm 114960 036434 4 Heavy-Duty Brass Shut-Off Valve, Single

#ad
Dramm #ad - Best shut-off available & Assembled in USA with American & foreign components. Dramm heavy-duty brass shut-Off designed to provide fingertip water control at the end of your water hose. Withstands higher pressure than comparable valves. Full water flow design with 3/4” standard hose thread. Ergonomic, large, quarter-turn handle controls water flow- even with wet or arthritic hands.
BrandDramm #ad
ManufacturerDramm #ad
Height3 Inches
Length2 Inches
Weight0.5 Pounds
Width2 Inches
Part Number114960
Model114960
WarrantyManufactured Warranty

3. Watts

#ad

Watts 1/2 175C 1/2 inch Bronze Ball-Type Washing Machine Shutoff Valve

#ad
Watts #ad - Easy to install. Single lever on-off. Bronze body construction. Washing Machine Shutoff Valve. 1/2 inch sweat copper ell adapters for copper tubing.
BrandWatts #ad
ManufacturerWatts #ad
Height2.8 Inches
Length3.9 Inches
Width3.7 Inches
Part Number0958060
Model175C 1/2

4. EDOU

#ad

EDOU 4,500 PSI High Pressure Washer Ball Valve Kit 3/8" Male Plug X 3/8" Female Quick Connect for High Pressure Washer Hoses

#ad
EDOU #ad - Superior value/ customer service - backed by a lifetimE after sale service and E-mail Customer Support within 24 h. Professional team is always on line.

Premium qualitymade of stainless steel. Max working pressure is up to 4, 500 PSI. Professional ball valve kitinclude 3/8” quick coupler plug and 3/8” quick coupler socket. The ball valve kit is designed for high-pressure hoses. Leak resistanceWith teflon tape, the ball valve is superior leak resistance. Good conveniencethe ball valve is easy to turn on & off and provides good leverage under high pressure. Switch wands, tips, or hoses quickly and easily.
BrandEDOU #ad
ManufacturerEDOU #ad

5. Tool Daily

#ad

3/8 Inch Quick Connect for Power Washer Hose, Tool Daily High Pressure Washer Ball Valve Kit, 4500 PSI

#ad
Tool Daily #ad - It offers great leverage under high pressure. Quick disconnect fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread; 3/8’’ quick coupler socket + 3/8’’ male NPT thread. The steel pressure washing ball valve kit is designed for pressure washer hose. Easy to connect ball valve to gun, nozzle, pump and hose. The ball valve is easy to turn on and off. The max working pressure is 4500 PSI. High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. The max working temperature is 158 F.
BrandTool Daily #ad
ManufacturerTool Daily #ad
Weight1.4 Pounds

6. FloodStop

#ad

New Floodstop Washing Machine Valve Shutoff Kit FS3/4H v4 Lead free Inline Valves

#ad
FloodStop #ad - Water/leak sensor is placed on the floor behind Washing Machine. Valves stay open until water loss is detected. Water on sensor immediately closes FloodStop valves and sounds alarm. Certified lead free under S. Each floodstop valve is screwed onto the hot and cold water hose bibs. 3874, ab1953.
BrandFloodStop #ad
ManufacturerOnSite Pro Inc. #ad
Height3 Inches
Length10 Inches
Width8 Inches
Part NumberFS3/4H v4
ModelFS3/4H v4

7. Homewerks

#ad

Homewerks VWM-DUA-F3B Washing Machine Valve, Brass, Male Pipe Thread, 1/2-Inch

#ad
Homewerks #ad - 3/4-inch hose thread outlet. Check your inlets before ordering. Carton Qunatity: 5. Compatible with hot/cold. Single lever. Inlets 2 3/8" on-center. Long-lasting.
BrandHomewerks #ad
ManufacturerHomewerks #ad
Height3.3 Inches
Length3.3 Inches
Width3.8 Inches
Part NumberVWMDUAF3B
ModelVWM-DUA-F3B
WarrantyLimited Lifetime Warranty

8. Angle Simple

#ad

Shower Head Flow Control Valve, Angle Simple Brass Shut Off Valve for Handheld Shower, Brushed Nickel, Water Volume Adjust Valve, Water Pressure Regulator, Water Flow Control Valve

#ad
Angle Simple #ad - Convenient water saver: great addition to a high flow shower, helps reduce water pressure, no more wasting hot water while getting soaped up. Substancial construction: all brass construction with preimum brushed nickel finish, quality material and craftsmanship for durability, resists corrode and tarnish.

Smooth operation, no leaking: inner ceramic valve for smooth operation, seals well without leaking, adds this valve to a dripping shower head without replacing all the plumbing. Easy water flow adjustment: our shower flow restrictor allows for regulating water volume or completely shutting off water flow while showering. Standard fitting, wall mount shower head or bidet sprayer, simple installation: both the male and female threads are 1/2" IPS for standardized handheld shower, easy to install by hand or wrench.
BrandAngle Simple #ad
ManufacturerAngle Simple #ad
Part NumberQ105P

9. Shark Industrial

#ad

6FT Heavy Duty PVC Hose Sealed With Rigid Corrugated Outer Wall in Red-Blue and Built-in Auto Shut-off Valve Univeral 90 degree elbow Connection, 2-pack Flood Safe Washing Machine Hoses

#ad
Shark Industrial #ad - Flood safe - the unique safety valve is designed to prevent potential flood from happening even when inner tube breaks. One pair 6ft flood safe washing machine hoses with two layers of reinforced PVC core and nylon braided lines in between covered with rigid corrugated outer tube in red-blue and built in safety valve for auto shut off when water leakage is detected between inner and outer tubing.

Money back guarantee - we offer 100% money back gurrantee with no questions asked. Rest assured for your purchases. Easy installation for home laundry room water supply lines. This double safety feature is an extra protection even a very small chance of leakage is happening from inner tube. Universal fit - the hoses connect to all washing machines with industry standard 3/4" 90 degree elbow FHTFemale Hose Threaded or FGHFemale Garden Hose connector fittings.

This great product also comes with 10-year warranty for quality related issues because we are so confident about our product quality. Industry standards - our hoses comply with following standards: aSME A112. 18. 6-2017/csa b125. 6-17, nsf/ansi 61, 372. The safety valve shut offs water supply when leakage is detected between the two walls of inner and outer tubes.
BrandShark Industrial #ad
ManufacturerShark Industrial #ad
Height2 Inches
Length14 Inches
Width12 Inches
Part NumberSHK-AQCB/CR-6GN-027