1. Freud
#ad
Freud 10" x 24T Thin Kerf Rip Blade LU87R010
#adFreud #ad - Positive hook angles for fast cutting and easy feeding in ripping applications. Thin kerf allows for faster feed rate and reduced waste. Perma-shield non-stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.More information #ad
Premium tico hi-density Carbide Ripping Blend for Maximum Performance. 10" blade diameter, 5/8" arbor, flat grind, .094" kerf, 24 teeth, 20° Hook Angle.Brand | Freud #ad |
Manufacturer | Freud #ad |
Height | 1 Inches |
Length | 1 Inches |
Weight | 1.71 Pounds |
Width | 1 Inches |
Part Number | LU87R010 |
Model | LU87R010 |
More information #ad
2. Kempston Corporation
#ad
Kempston 99312 10-Inch by 24 Tooth Industrial Rip Thick Kerf Blade with 5/8-Inch Arbor
#adKempston Corporation #ad - Precision Ground. Laser Cut Body. Anti-kickback Design. C. N. C. Premium Carbide. Industrial grade Thick Kerf Saw Blade.More information #ad
Brand | Kempston Corporation #ad |
Manufacturer | Kempston Corporation #ad |
Height | 0.31 Inches |
Length | 13.7 Inches |
Width | 11.61 Inches |
Part Number | 99312 |
Model | 99312 |
Warranty | Limited Lifetime Warranty against all manufacturing defects. This warranty does not apply to defects caused directly or indirectly from misuse, re-sharpening, abuse, negligence, accidents, repair or alteration. Normal wear and tear are not covered under this warranty. |
More information #ad
3. CMT
#ad
10-Inch. x 24 Teeth FTG Grind with 5/8-Inch. Bore, CMT 201.024.10 Industrial Ripping Saw Blade, PTFE Coating
#adCMT #ad - For for fast, smooth, heavy-duty rip cuts on soft/hardwood Good performance on plywood. Technical details: kerf thickness 0126, 20° hook angle, plate thickness 0087, FTG -Flat Top Grind.More information #ad
Micrograin carbide teeth to last longer and deliver smooth cuts. Non-stick ptfe coating keeps the blade running cool, reduces pitch build-up and protects against corrosion. To be used on radial arm saws, miter saws, table and special saws.Brand | CMT #ad |
Manufacturer | CMT #ad |
Height | 0.13 Inches |
Length | 10 Inches |
Weight | 2 Pounds |
Width | 10 Inches |
Part Number | 201.024.10 |
Model | 201.024.10 |
Warranty | CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment. |
More information #ad
4. CMT
#ad
10-Inch x 24 Teeth 1FTG+2ATB Grind with 5/8-Inch Bore, CMT 250.024.10 ITK Industrial Rip Saw Blade
#adCMT #ad - Laser-cut plate features expansion slots to reduce noise and anti-vibration design. To be used on radial arm saws, miter saws, table saws for cutting soft/hardwood. For fast rip cuts on soft/hardwood thanks to the thin kerf design.More information #ad
0098 kerf thickness, 0071 plate thickness, 20° hook angle, 1 Flat + 2/15° alternate teeth Grind. Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products. Good on plywood.Brand | CMT #ad |
Manufacturer | CMT #ad |
Height | 0.1 Inches |
Length | 10 Inches |
Weight | 1.76 Pounds |
Width | 10 Inches |
Part Number | 240.008.04 |
Model | 250.024.10 |
Warranty | CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment. |
More information #ad
5. Micro-kerf
#ad
10" Micro-Kerf40 1/16"Kerf Table Saw & Mitre Saw Blade with 5/8" Arbor
#adMicro-kerf #ad - Minimal dust, noise and power consumption. 1/16" kerf 10" diameter all purpose carbide tipped circular saw blade. Thin as a dime -. 060" kerf. Free instructional DVD and applications support. Made environmentally friendly in the USA.More information #ad
Brand | Micro-kerf #ad |
Manufacturer | Total Saw Solutions, Inc. #ad |
Height | 10 Inches |
Length | 10 Inches |
Width | 0.06 Inches |
Part Number | MK1040625 |
More information #ad
6. CMT
#ad
.126 Kerf, 1" Bore Table Saw Ripping Blade, CMT 201.030.12 12" x 30 Tooth FTG
#adCMT #ad - 0126 kerf thickness, 0087 plate thickness, 20° hook angle, FTG-Flat Top Grind. For for fast, smooth, heavy-duty rip cuts on soft/hardwood. Good performance on plywood.More information #ad
Micrograin carbide teeth to last longer and deliver smooth cuts. Non-stick ptfe coating keeps blade running cool, reduces pitch buildup, protects against corrosion. To be used on radial arm saws, miter saws, table and special saws.Brand | CMT #ad |
Manufacturer | CMT #ad |
Height | 0.13 Inches |
Length | 12 Inches |
Weight | 2 Pounds |
Width | 12 Inches |
Part Number | 201.030.12 |
Model | 201.030.12 |
Warranty | CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment. |
More information #ad
7. Forrest
#ad
Forrest DH22807125 Duraline Hi-A/T 220 mm 80 Tooth #7 0.125 Kerf Saw Blade with 30 mm Arbor
#adForrest #ad - This blade will cut Melamine and Plywoods perfectly with no tears or chips. Eliminates need for a small scoring saw blade on table saw work. Forrest dh22807125 duraline hi-a/t - diameter d = 220 mm, kerf k = 0125, teeth t = 80, arbor a = 30 mm, Tooth Style = #7.More information #ad
The 40° points slice through thin bottom layers with no tears or chips. Made with double-hard c-4 Submicron Carbide for up to 300% longer life.Brand | Forrest #ad |
Manufacturer | Forrest #ad |
Part Number | DH-22-80-7-125 |
More information #ad
8. Amana Tool
#ad
By Amana Tool, Ripping 10" x 24T Atbft 5/8" Bore MA10024, MAMBA
#adAmana Tool #ad - Commitment to offer the highest consistent quality and innovative products. Corporate headquarters and warehouse, located in new York.More information #ad
U. S. A. Devotion to consistently providing the highest quality. High grade materials and tooling. Solutions for manufacturers, fabricators, display and cabinet professionals.Brand | Amana Tool #ad |
Manufacturer | Amana Tool #ad |
Weight | 0 Pounds |
Part Number | MA10024 |
Model | MA10024 |
Warranty | LIFETIME GUARANTEE *Against saw blade material and workmanship defects, subject to guidelines. |
More information #ad
9. Freud
#ad
Freud 10" x 24T Heavy-Duty Rip Blade LM72R010
#adFreud #ad - Extra large, flat tooth Design leaves a smooth finish without the need for sanding or jointing. Premium tico hi-density Carbide Ripping Blend for Maximum Performance. Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish.More information #ad
Perma-shield non-stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up. 10" blade diameter,. 126" kerf, 24 teeth, flat grind, 5/8" Arbor, 20° Hook Angle.Brand | Freud #ad |
Manufacturer | Freud #ad |
Height | 1 Inches |
Length | 1 Inches |
Weight | 1.96 Pounds |
Width | 1 Inches |
Part Number | LU87R010 |
Model | LM72R010 |
More information #ad