As an Amazon Associate I earn from qualifying purchases.
1. C.S. Osborne #ad
C.S. Osborne Adjustable U-Gouge Tool #adC.S. Osborne #ad
- Grooving allows the material to be neatly bent around corners. Features an adjustable depth setting with a guard that helps prevent you from cutting too deep. This convenient tool features a u-shaped blade that allows you to groove the back of leather precisely.
2. Bon Tool #ad
Bon Tool 14-585 Cove Base Groover #adBon Tool #ad
- Package dimensions : 3. 75" l x 6. 5" w x 1. 25" h. Equipped with 5/32" U-shaped blade with adjustable cutting depth. Eliminates costly preformed corners. Removes materials from the back of vinyl or rubber cove bases.
|Brand||Bon Tool #ad|
|Manufacturer||Bon Tool #ad|
3. Crain #ad
Cove Base Gouger, Cove Base Groover and Cutter #adCrain #ad
- The 5/32" wide blade adjusts for depth. Produce tighter-wrapped corners. This handy tool gouges the back of vinyl or rubber top set cove base.
4. CNBTR #ad
CNBTR Carbon Steel Carving Firmer Gouge Semicircle Wood Chisel Set DIY Woodworking Handle Carpentry Tools Pack of 4 #adCNBTR #ad
- Note: it is initial forged edge processing, no final finish on it. The blade edge at the inside bevel of the steel gouge, please check it in the pictures. How to use: hit the wood handle of the chisel by a hammer when work on solid wood.
Dimension of the 4 blade width: 1/4", 3/4", 1/2", 1" ; the total length from wood handle to steel end 24cm/9.5". Made of hard carbon Steel and polished solid wood. You need to sharpen and regrind the edge before use.
5. Goldblatt #ad
Removal Multi-Tool for Commercial Work, Molding, Baseboard, Siding and Flooring Removal, Goldblatt Trim Puller, Remodeling #adGoldblatt #ad
- An impact absorbing FPR handle makes it comfortable to hold, though. Trim saving - the trim removal tool has a larger, flatter and wider contact area than clumsy traditional tools and features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall.
Durable pry bars - our trim puller are made from 65 mn steel with black electrophoretic and polished finish which protect against corrosion and give our pry bar added durability and strength. The very edge can also used to pry up the staples.
Revolutionary tool - our trim puller is a very beefy tool. Ergonomic handle - all our trim puller is built with an ergonomic, comfortable and textured dipped handle. Multi-function - ideal for commercial work, removing a couple of sections of baseboard, a countertop from some base cabinets, repair and remodel projects where care and precision are needed including cabinets, flooring and many more.
So the trim puller is a very beefy tool, and it will hold up well to repeated whacking. The build-in spring design assists in separating trim from wall freely and quickly. It can be used on a kitchen remodel, countertops, and pulling up a ceramic tile floor. The 15 degree wedged center is for easy extraction of trim and baseboards.
6. HURRICANE #ad
Hurricane 4 Pieces Wood Chisel Set Cr-V Construction for Woodworking Carving PVC High Impact Handle #adHURRICANE #ad
- Surface treating: Lacquer coating protects and lubricates blade for smooth cutting. Comes with sizes: 1/4", 1/2'', 1'', 3/4'', full length blade guard for added safety. Premium material: drop forged chrome-vanadium steel blade for durability and heat treated for edge retention.
Edge: bevel edge for woodworking carving multi-purpose use, suitable for all soft wood, hard wood and laminated wood products. Handle: pvc colored transparent high impact handle.
7. COUKIU #ad
Peel and Stick Rubber Baseboard Molding, 4 Inch x 16.4 Feet Vinyl Wall Base Cove Base Milky White, COUKIU Flexible Wall Base Moulding Trim #adCOUKIU #ad
- Self stick premium rubber baseboard:made from high density nbr foam cotton with a super strong stickiness after peeling off the sticker. 13/32 inchthickness x 4 inchwidth x 16. 4feetlength color: Milky white（Not pure white）. The soft, self-adhesive and cuttable properties make it suitable for use in a variety of different scenarios.
Especially on some arched or irregular edges. Simple installation allows you to install without tools. This is definitely a great investment. Easy to use:measure the vinyl baseboard and cut the length you need, it will be difficult to stick as expected.
The plaster wall, peel off the adhesive backing and stick to smooth surface. Before installation, be sure to clean the surface of the adherend. If it is greasy, or moisture, dust, brick wall and tempered glass may be slightly less sticky.
Note: the above conditions will be better for the paste effect under the action of glue and hot air blower. Perfect for baseboard, floor, bedroom, metal, plastic, cabinet, Old house renovation, kitchen and more. Apply to nursery decoration, child room protection, corner, bathroom, Office decoration, ceiling, playground renovation, smooth wall, edge, border, home security protection essential products. Widely applicable:adhesive base board can stick to almost any smooth surface tiles, wood, glass, wall, ext. No mess, we provide free replacement.
8. Bon Tool #ad
Ronan 14-536 4-Inch Multi-Cutter Cove Base Shears #adBon Tool #ad
- It finishes the cut against a replaceable, shrubs, PEX pipe, all types of hoses, high impact plastic anvil that protects the blade from wear while it prevents splintering and fraying of the item you're cutting. It also comes with a safety lock to assure the tool stays closed when not in use.
The multi-cut uses industrial rated usa made steel razor blades manufactured to ronan tools demanding specifications. Replacement blades can also be purchased from your dealer so your Multi-Cut will always be razor sharp for precise, easy cutting.
The multi-cut enables you to cut plastic, automotive belts, linoleum, thick leather, dowels, hobby & craft items. This is an outstanding tool for both the contractor and "do it yourselfer" who needs to cut the tough stuff. The multi-cut has a molded ergo-grip handle that fits both small and large hands to promote comfort and lessen fatigue.
In fact, your multi-cut comes with 3 extra blades stored in the handle for your convenience. The offset pivot point gives you extra leverage, making difficult items easy to cut. These special razor blades will last an average of 18 months each and can be easily replaced. Its black oxide coating resists rust and corrosion. Inch graduations are etched into the blade to aid in notching or simple measuring.
|Brand||Bon Tool #ad|
|Manufacturer||Bon Tool #ad|
9. InstaTrim #ad
Ceilings, Instatrim 1/2 Inch Covers 1/4" Gap Flexible, 2 Pack, 10ft Long, Self-Adhesive, Caulk and Trim Strips for Floors, Countertops and More White #adInstaTrim #ad
- Application surface must be cleaned and dried or the adhesive will not stick - clean with a mild cleaner and water. Use it as a trim finish on crown molding, and more. Flexible trim is an easy to use replacement for molding, and damaged corners.
1/2 inch size covers 1/4 inch gap - Made in the USA. For even better adhesion, use the InstaTrim Applicator! Cover wall stress cracks, caulk, gaps, wall cabinets and floors. Non-toxic odorless adhesive adheres to almost any surface, doors, floors, including walls, and more.
Peel and stick application makes it easy to cover cracks, and damaged corners when applied with firm, gaps, constant pressure. Be sure to remove all soap residue and do not use cleaning products that contain oils or wax. Not recommended for use with popcorn ceilings - Use 1/2 inch wide InstaTrim for all ceiling applications.
|Manufacturer||CornerFlex, Inc #ad|
|Warranty||1 Year Manufacturer Warranty|