Top 9 CMT Flush Trim Router Bit – Manual Pole Saws

As an Amazon Associate I earn from qualifying purchases.

1. CMT

#ad

1-1/2-Inch Cutting Length, Carbide-Tipped, 1/2-Inch Shank, CMT 806.629.11 Flush Trim bit

#adCMT #ad - Cmt bits were rated the best overall in comparison to other brand Test by Wood Magazine. For cutting hardwood/softwood, laminates Use on router tables only, not for hand-held routers. Super-strength superior steel, Non-Stick Orange Shield Coating. 1/2-inch cutting diameter, 3-45/64-Inch Length, Bearing included. 2 sinterhip hi-density Industrial Chrome Carbide cutting edges.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	0.5 Inches
Length	2.8 Inches
Weight	0.25 Pounds
Width	0.5 Inches
Part Number	806.629.11
Model	806.629.11
Warranty	Limited Lifetime Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

2. CMT

#ad

2-Inch Cutting Length and 1/2-Inch Shank, CMT 806.690.11B Flush Trim Bit with Double Bearing

#adCMT #ad - 3/4-inch diameter, 4-5/16-Inch Overall Length. Down shear design allows for clean smooth cuts on many materials. Excellent for routing curved elements along or against the grain. No need to flip or move your tool if you need to ride it from either direction to the other side. 2 carbide cutting tips for long-lasting performance.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	0.75 Inches
Length	4.31 Inches
Weight	0.4 Pounds
Width	0.75 Inches
Part Number	806.690.11B
Model	806.690.11B

3. CMT

#ad

1/2-Inch Shank, Carbide-Tipped, CMT 812.691.11B Pattern Bit with Bearing, 3/4-Inch Diameter

#adCMT #ad - Cmt bits were rated the best overall in comparison to other brand Test by Wood Magazine. To be used on softwod, hardwood and wood composites. 2-inch cutting length, 3-1/4-Inch Length, Equipped with Bearing. 2 sinterhip hi-density Industrial Chrome Carbide cutting edges. Smooth and precise cut Exceptional chip ejection to allow cleaner and more constant cutting.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	0.75 Inches
Length	3.25 Inches
Weight	0.25 Pounds
Width	0.75 Inches
Part Number	812.691.11B
Model	812.691.11B
Warranty	Limited Lifetime Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

4. CMT

#ad

Carbide-Tipped, CMT 806.095.11 Flush Trim bit, 1/4-Inch Shank, 1-Inch Cutting Length

#adCMT #ad - Super-strength superior steel, Non-Stick Orange Shield Coating. 2 sinterhip hi-density Industrial Chrome Carbide cutting edges. For cutting hardwood/softwood, laminates Use on router tables only, not for hand-held routers. Cmt bits were rated the best overall in comparison to other brand Test by Wood Magazine. 3/8-inch cutting diameter, 2-11/16-Inch Length, Bearing included.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	3 Inches
Length	3.31 Inches
Weight	0.1 Pounds
Width	3 Inches
Part Number	806.095.11
Model	806.095.11
Warranty	Limited Lifetime Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

5. CMT

#ad

CMT 806.630.11 Flush Trim Bit with 2-Inch Cutting Length and 1/2-Inch Shank

#adCMT #ad - 2 carbide cutting tips for long-lasting performance and heavy-duty steel body. 1/2-inch diameter, 4-3/32-Inch Overall Length. Heavy-duty steel body. For trimming operations on laminates with excellent results.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	0.5 Inches
Length	4.96 Inches
Weight	0 Pounds
Width	0.5 Inches
Part Number	806.630.11
Model	806.630.11

6. CMT

#ad

CMT 806.191.11 Super-Duty Flush Trim Bit, 1-Inch Cutting Length, 1/4-Inch Shank

#adCMT #ad - For flush trimming on both natural wood and laminates. 2 hi-density carbide cutting edges and negative shear angle design for long-lasting performance. Equipped with a bearing for easy and efficient template work. 3/4-inch cutting diameter, 2-59/64-Inch Length. Work quickly and safely to get a superior finish with absolute minimal chipping.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	2 Inches
Length	6 Inches
Weight	0.15 Pounds
Width	2 Inches
Part Number	806.191.11
Model	806.191.11
Warranty	Limited Lifetime Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

7. CMT

#ad

1/4-Inch Shank, 1/2-Inch Cutting Length, Carbide-Tipped, CMT 806.096.11 Flush Trim bit

#adCMT #ad - Cmt bits were rated the best overall in comparison to other brand Test by Wood Magazine. 2 sinterhip hi-density Industrial Chrome Carbide cutting edges. For cutting hardwood/softwood, laminates Use on router tables only, not for hand-held routers. 3/8-inch cutting diameter, 2-3/16-Inch Length, Bearing included. Super-strength superior steel, Non-Stick Orange Shield Coating.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	0.5 Inches
Length	2.69 Inches
Width	0.5 Inches
Part Number	806.096.11
Model	806.096.11
Warranty	Limited Lifetime Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

8. CMT

#ad

CMT 806.128.11 Flush Trim bit, 1/2-Inch Cutting Length, 1/4-Inch Shank, Carbide-Tipped

#adCMT #ad - For cutting hardwood/softwood, laminates Use on router tables only, not for hand-held routers. Super-strength superior steel, Non-Stick Orange Shield Coating. 1/2-inch cutting diameter, 2-9/32-Inch Length, Bearing included. Cmt bits were rated the best overall in comparison to other brand Test by Wood Magazine. 2 sinterhip hi-density Industrial Chrome Carbide cutting edges.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	0.5 Inches
Length	2.8 Inches
Width	0.5 Inches
Part Number	806.128.11
Model	806.128.11
Warranty	Limited Lifetime Warranty: CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits.

9. CMT

#ad

CMT 806.001.11 3-Piece Flush Trim Bit Set, 1/4-Inch Shank

#adCMT #ad - Contains 3 flush trim bits featuring 3/8 and 3/4-Inch Diameter. Right-hand rotation. 2 hi-density carbide cutting edges for long-lasting performance. Equipped with bearing for easy template work.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	2 Inches
Length	6 Inches
Weight	0.5 Pounds
Width	2 Inches
Part Number	806.001.11
Model	806.001.11
Warranty	CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.