Top 9 Automated Blast Gates – Vacuum & Dust Collector Accessories

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking

#ad

PSI Woodworking LRMSET220 Long Ranger 220V Multigate Dust Collection Motor Starter Switch System

#ad
PSI Woodworking #ad - Easy installation. Multigate switch system to control power to your dust collector. 100 feet of low voltage wire included. Allows unlimited number of additional gates 1 is included. Turns on 220 volt d/c when opening blast gate, then off when last gate closes.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height5 Inches
Length10 Inches
Width5 Inches
Part NumberLRMSET220
ModelLRMSET220
Warranty2 Years Under Normal Use

2. eufy

#ad

Robot Vacuum Cleaner, Super-Thin, Cleans Hard Floors to Medium-Pile Carpets, Quiet, Self-Charging Robotic Vacuum Cleaner, BoostIQ RoboVac 11S Slim, 1300Pa Strong Suction, eufy by Anker

#ad
eufy #ad - Included in the “best robot vacuums of 2019” by Tom’s Guide. A quiet clean: vacuums for up to 100 minutes** on hardwood floors with consistent, powerful suction at a volume no louder than an operating microwave.

Boostiq technology: automatically increases suction power within 1. 5 seconds when extra vacuuming strength is needed to get the best clean. All-new robovac: re-engineered to be the slimmest* RoboVac 2. 85'' but with quiet operation and increased suction power at 1300Pa. Automatically recharges so it's always ready to clean. What you get: robovac 11s, remote control 2 aaa batteries included, 5 cable ties, ac power adapter, extra set of high-performance filters, welcome guide, cleaning tool, charging base, 4 side brushes, and our worry-free 12-month warranty.

Premium features: anti-scratch tempered glass-top cover for protection, infrared-sensor for evading obstacles, and drop-sensing tech to avoid falls.
Brandeufy #ad
Manufacturereufy #ad
Height2.85 Inches
Length12.8 Inches
Weight5.73 Pounds
Width12.8 Inches
Part NumberAK-848061065329
ModelEufy RoboVac 11S
WarrantyManufacturer.

3. iVAC

#ad

IVac Pro 4'' Blast Gate

#ad
iVAC #ad - 4" molded resin housing construction with motorized metal knife gate. Choose from automatic, wireless or switched wired operation. Powered by included 115V UL/CSA approved AC adaptor. Ivac pro remote control and ivAC PRO Tool Plus Sensor sold separately. Self-cleaning mechanism with motor overload protection.
BrandiVAC #ad
ManufacturerBCTINT Limited #ad
Height3.8 Inches
Length12.9 Inches
Width6.1 Inches
Part NumberPBG-04-NA

4. Jet

#ad

4-Inch Aluminum Blast Gate, JET JW1142

#ad
Jet #ad - Durability: features heavy-duty aluminum construction with a steel gate, designed for eliminating air leakage. Efficiency: maximizes your dust collection system by directing and regulating air flow from one machine to machine.

Universal fit: blastgate is compatible with most shop vacs or shop dust collector systems with 4” ID hoses for woodworking. Functionality: clog-proof design eliminates the need for constant maintenance, along with an easy-sliding gate and locking knob to ensure perfect gate alignment. Versatility: a reliable extension port for your table saw, planer, drill, miter saw, and other woodworking machines.
BrandJet #ad
ManufacturerJET #ad
Height2 Inches
Length5 Inches
Weight0.9 Pounds
Width5 Inches
Part NumberJW1142
ModelJW1142
Warranty1-Year

5. Etoolcity

#ad

Etoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Eliminating Circuit Breaker Tripping, Automatic Vacuum Switch for Power Tools

#ad
Etoolcity #ad - Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. Adopting high-cost, the etoolcity automatic vacuum switch can work stably within 3600W. If the tool motor connected to the 'a' port exceeds 30w, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time.

You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Suitable for most medium duty workloads. Two installation methods. Etoolcity automatic vacuum switch has a starting threshold of approximately 025 amps30watts at 120v and 60watts at 220v, power sanders and Routers, perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, and extend the life of your vacuum.

Unique current sensing technology. The switch's shell has pc+abs v0 grade flame retardant material, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, it is more reliable and safe to protect work. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems. Make the work more effective. Both ways are very strong.
BrandEtoolcity #ad
ManufacturerEtoolcity #ad
Part Numberec
ModelLF40-HVC01

6. CO-Z

#ad

CO-Z Automatic Sliding Gate Opener with 2 Remote Controls, Complete Gate Operator Hardware Security System Kit for Sliding Gate Up to 40 Feet, Electric Rolling Driveway Slide Gate Motor

#ad
CO-Z #ad - Rf hopping code technology prevents your remote code from being accessible to others. For 40 ft. Range - the complementary remote controls operate perfectly within 100 ft, so you do no get out of your car to open the gate ever again, comes with 4 buttons for open/close/stop open/close stop.

Includes 20 ft of chain or a maximum of weight of 1, 400 lb. Suitable for 110V. Durable with unparalleled safety - constructed with aluminum base, copper worm-gear for durability; CE approval for ultimate safety. 1, 400 lb. Quiet & powerful 280w motor - the integrated 280w ac motor drives the gate opener smoothly at the speed of 43 ft.

Auto-close feature - featuring an auto-close option, this slide gate opener can be set to close in 12, 24, or 36 seconds after it opens; you can add 23 more remotes to control this system for convenience. Min while producing less than 56 dB noise. Gate - this product is designed for heavy-duty sliding gate up to a maximum length of 40 ft. 100 ft.
BrandCO-Z #ad
ManufacturerCO-Z #ad
Height17.3 Inches
Length10.8 Inches
Weight34.3 Pounds
Width10 Inches
Part NumberCOZ SGO CA
Modelgate opener

7. POWERTEC

#ad

POWERTEC 70136 4-Inch Hose to 2-1/2 Inch Hose Cone Reducer

#ad
POWERTEC #ad - Function: a handy double sided adapter that allows you to step down from your larger 4” dust collection hose to a smaller 2-1/2 shop vacuum hose branch line. The 2-1/2 in.

Premium: made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection. Includes: 4” to 2 1/2” Dust Collection Hose Reducer. Please note: this cone reducer is specifically designed to work exclusively with 4” and 2-1/2” hoses | It is NOT intended to fit or accommodate a 2-1/2” OD or 4” OD dust collection equipment port directly which would require POWERTEC 70149 or 70148 Flex Cuffs. Opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners. Dimensions: 4” nominal od end measures 3-61/64” od and 3-41/64” id; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID.
BrandPOWERTEC #ad
ManufacturerSouthern Technology LLC #ad
Height4 Inches
Length4 Inches
Weight0.2 Pounds
Width4 Inches
Part Number70136
Model70136

8. Oneida Air Systems

#ad

The Dust Deputy Deluxe Anti-Static Cyclone Separator 5 Gallon Kit

#ad
Oneida Air Systems #ad - Longer lifespan – prevents fine dust and large debris from reaching your dust filter, allowing you to keep working harder, reducing the need for cleanings and prolonging the lifespan of your filter. Works with most materials: wood dust, blasting soda, cooled ash & soot, drywall dust, water, baking flour, pet/animal hair, and much more!.

Wet or dry – this simple and efficient design can be adapted for use with any make, concrete dust, metal shavings, grass & leaves, size, clay/silica dust, pharmaceutical waste, or model shop vacuum and features tapered 2.00" ports for secure fittings using a variety of dust collection hose sizes. Portable design can be mounted directly to the vacuum. Us pat. 6833016, re40048, 7282074. The dust deputy deluxe will save you countless time and money on expensive replacement vacuum filters and dust bags, longer, and safer than ever! Increased suction power - the original shop vacuum cyclone, now 20% more throughput cfm and efficiency with Neutral Vane Technology, Oneida Air Systems' patented Dust Deputy cyclone uses centrifugal force to capture and remove 99% of dust and debris from the air-stream before it reaches your vacuum filter, eliminating clogged filters and suction loss!.

BrandOneida Air Systems #ad
ManufacturerOneida Air Systems #ad
Height29.25 Inches
Length12 Inches
Weight10.2 Pounds
Width12 Inches
Part NumberAXD000004A
ModelAXD000004A

9. vmaisi

#ad

Extra Long Wall Mounting Accessories Screws Rods Adapter Bolts Black, 4 Pack 8MM Baby Gate Threaded Spindle Rod, Replacement Hardware Parts Kit for Pet & Dog Pressure Mounted Safety Gates

#ad
vmaisi #ad - Black spindle rods baby gate replacement Parts - Baby Gate Extender Extra longer 4. 8 inches total. Baby gate spindle rods work just as well as the factory bolts.

4 pack 8mm baby gate threaded spindle rod, extra longer 12cm 4. 8 inches replacement hardware parts kit for pet & Dog Pressure Mounted Safety Gates - Extra Long Wall Mounting Accessories Screws Rods Adapter Bolts Black. Metal material with plastic adjustable wheel Black, extra long m8 spindle rods. Replacement for the originals. This work great as replacement wall grips for our Baby Gate. If you lost your originals like I did, just get replacement one.
Brandvmaisi #ad
Manufacturervmaisi #ad
Height1.5 Inches
Length4.88 Inches
Width1.5 Inches
Part Number8MM Black
ModelM8-Black