Top 8 Alignment Pin Tool – Hand Punches

As an Amazon Associate I earn from qualifying purchases.

1. Klein Tools

 #ad

1-1/4-Inch, Broad Head Bull Pin Resists Corrosion and Mushrooming, Heat Treated Steel with Black Finish, Klein Tools 3255 Bull Pin

#ad
Klein Tools #ad - Forged, heat-treated bull pin increases efficiency by providing a larger striking surface. Head design also reduces chance of pin slipping from the hand when aligning holes. Below the head, squared-off shoulders have been forged to provide a surface for applying wrench to loosen wedged bull pins. Angled head and smooth blending of radii increase strength and reduce the danger of chipping. Long, even taper reduces binding and hang-up.
BrandKlein Tools #ad
ManufacturerKlein - Geneva Supply #ad
Height1.8 Inches
Length13.5 Inches
Weight2.87 Pounds
Width1.8 Inches
Part Number3255K
Model-P

2. Titan

 #ad

Contains 2 Units of pin Sizes 3/4", 7/8", 1-1/4", Titan Flange Alignment Pin Set with Case, 1", 1-1/8"

#ad
Titan #ad - The titan flange alignment pin’s tapered shaft is a patented feature that eliminates the need for hammering and prying when lining up flange bolt holes. Titan flange alignment pins eliminate the need for hammering drift pins or fighting with spud wrenches. Titan flange alignment pins from SMP are safe, fast, and effective. Titan flange alignment pins are the only flange alignment pins on the market that compensate for up and down, as well as rotational misalignment. The simplicity of the Titan flange alignment pins make them the most affordable flange alignment solution on the market.
BrandTitan #ad
ManufacturerSpecialty Maintenance Products #ad
Weight15 Pounds
Part NumberSMP-FTS28

3. Saipe

 #ad

Set of 4, Saipe 16 Pcs Wood Dowel Tenon Centers Dowel Pin Center Point Woodworking Alignment Tool 6/8/10/12mm

#ad
Saipe #ad - Usually applied to accurate alignment of drill holes when doing dowel pin joinery. Functions dowel centers allow you to precisely transfer the location of one set of dowel holes to the corresponding locations in the other half of a doweled joint.

Application the dowel centers can be used to install and locate cabinets, and other wooden boards, bookshelves, necessary for carpentry. Size and quantity available in 4 different sizes, which are 6mm/8mm/10mm/12mm, total 16pcs, 4pcs of each size. The pins on the dowel centers will precisely mark the positions of the holes on the other side. How to use just drill a set of holes, slide in the center of the pin and press the joint together. Material made of premium steel with chromed finish so it is of high hardness and not easy to rust for long service time.
BrandSaipe #ad
ManufacturerSaipe #ad
Part Number761344877702

4. Real Avid

 #ad

Real Avid Pivot Pin Tool AVAR15PPT, Red

#ad
Real Avid #ad - Simplify the pivot pin installation process. Compatible with the pivot pin of any 223. Includes 3 components detent plunger, clevis pin, and install tool and directions for Use. Great addition to the tool kit of any new or experienced gun owner. Durable non-marring components you can trust on your favorite gun. Included components: Pivot Pin Installation Tool.
BrandReal Avid #ad
ManufacturerReal Avid #ad
Weight0.09 Pounds
Part NumberAVAR15PPT
ModelAVAR15PPT
WarrantyContact Real Avid

5. Mayhew Tools

 #ad

4-Piece, Mayhew Pro 62235 Line-Up Punch Kit

#ad
Mayhew Tools #ad - Includes storage pouch. 22011 5/32-inch black oxide Line-Up Punch. 22010 1/8-inch black oxide Line-Up Punch. 22012 3/16-inch black oxide Line-Up Punch. Includes: 22003 1/4-inch Black Oxide Line-Up Punch.
BrandMayhew Tools #ad
ManufacturerMayhew #ad
Height1 Inches
Length1 Inches
Weight0.01 Pounds
Width1 Inches
Part Number62235
Model62235
WarrantyManufacturer

6. GEARWRENCH

 #ad

GEARWRENCH 4 Pc. Long Taper Punch Set, 82307

#ad
GEARWRENCH #ad - Ground surface for ease of identification. Softened and Tapered Striking end reduces potential to chip. Used to install and Remove Pins and Shafts and To Align Holes. Precision Harded working ends.
BrandGEARWRENCH #ad
ManufacturerCooper Tools #ad
Height1 Inches
Length12 Inches
Weight1.5 Pounds
Width4 Inches
Part Number82307
Model82307

7. BOSCH

 #ad

BOSCH RA1151 Router Subbase Centering Pin and Cone

#ad
BOSCH #ad - For bosch routers that have the Precision Centering Design. Used for centering template guides. For precise centering of template guides and attached subbases.
BrandBOSCH #ad
ManufacturerBosch #ad
Height6.39 Inches
Length1.01 Inches
Weight0.16 Pounds
Width3.92 Inches
Part NumberRA1151
ModelRA1151

8. TEKTON

 #ad

TEKTON Alignment Punch Set, 9-Piece 1/16-3/8 in. | PNC96001

#ad
TEKTON #ad - Individual heat treatment allows careful control of tip hardness and temper of striking end. Classic natural finish has a dry-touch, rust-preventative coating. Made in USA. Gradually tapered, self-centering nose aligns holes in multiple parts, positioning them for accurate assembly. Straight and true, tip and taper are precisely machined to meet exacting tolerances. Alignment punches: 1/16, 3/32, 5/32, 1/4, 1/8, 3/16, 5/16, 7/32, 3/8 in. Includes 9-pc. Made from premium, high carbon steel.
BrandTEKTON #ad
ManufacturerTEKTON #ad
Height2.2 Inches
Length14.3 Inches
Weight4.44 Pounds
Width2.2 Inches
Part NumberPNC96001
ModelPNC96001
WarrantyNo time limits, no receipts: tekton.com/tool-help