Top 10 ZWave Switch Motion – Electrical Light Switches

As an Amazon Associate I earn from qualifying purchases.

1. GE

#ad

26931, Wink, Zwave Hub Required, Vacancy / Occupancy Sensor, Works with SmartThings, On/Off, GE Enbrighten Z-Wave Plus Smart Motion Sensor Light Switch, Includes White and Lt. Almond, and Alexa

#ad
GE #ad - Works with the following z-wave certified hubs: smartthings, adt command, Trane, Harmony Home Hub Extender, Wink, Honeywell, ADT Pulse, Vivint, Home Seer, Ring Alarm, Nexia, Vera and more. Please refer user guide below for better use. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft.

Additionally, while lights are turned on manually and off automatically in the vacancy setting. To deactivate the motion sensor, select manual operation. Up to four add-on switches can be connected to the same device. Voltage:120 volt. Occupancy mode turns lights ON/OFF automatically, enjoy custom scenes, the switch accommodates any room with varying amounts of activity.

Works with all led, cfL, incandescent and halogen bulbs as well as other devices. Includes white and light almond cover buttons wall plate not included. Neutral wire requirED. With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub. Operating temperature range 32-104 degrees Fahrenheit.
BrandGE #ad
ManufacturerJasco #ad
Height3 Inches
Length1.5 Inches
Weight0.4 Pounds
Width1.5 Inches
Part Number26931
Model26931
Warranty2-Year Limited Warranty

2. GE

#ad

GE 26933 Z-Wave Plus 500 Series Motion-Sensing in-Wall Dimmer

#ad
GE #ad - Includes white and light almond cover buttons wall plate not included. To deactivate the motion sensor, vacancy and manual. Additionally, cfl, incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life. Supported wattage – 600w incandescent; 150W LED/CFL. 3-way ready – the smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199.

Full-range dim ability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Works with the following z-wave certified hubs: smartthings, adt command, Nexia, Vivint, Wink, ADT Pulse, Honeywell, Trane, Ring Alarm, Home Seer, Harmony Home Hub Extender, Vera and more. Extended signal range increases your home automation coverage to enhance your control. Select motion control – the dimmer adjusts brightness levels of dimmable led, while lights are turned on manually and off automatically in the vacancy setting.

With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub. Easy installation – requires indoor in-wall installation with hardwired connections. Personalize the dimmer with three motion-detection options – occupancy, select manual operation. Full-home coverage – z-wave plus works with all previous z-wave generations to allow continued expansion of your home-automation network.
BrandGE #ad
ManufacturerJasco Products Company #ad
Height3 Inches
Length1.5 Inches
Weight0.7 Pounds
Width1.5 Inches
Part Number26933
Model26933
Warranty2-Year Limited Warranty

3. GE Lighting

#ad

Dimmer Switches Without Hub, Smart Dimmer Switch Works with Google Home + Alexa, Bluetooth/Wi-Fi, Single-Pole/3-Way, 1-Pack Packaging May Vary, C by GE 4-Wire Smart Motion Sensor Light Switch

#ad
GE Lighting #ad - Build your smart home with smart bulbs that work with Alexa and Google Home: Cync and C by GE smart bulbs and the smart switch dimmer work with voice and app control at all times, even when the wall switch is turned off. A smart dimmer switch for led lights and more: set scenes to match your mood by controlling the dimmer switch with the Cync mobile app, touch, or voice assistant to control brightness level.

Works with led, incandescent, halogen, and CFL bulbs. Make traditional light bulbs smart bulbs: the C by GE smart dimmer allows you to easily make your light bulbs compatible with Google Home or Amazon Alexa when paired with your smart devices. Save money and energy with the c by ge motion sensor Light Switch: Motion and ambient light detection turn light bulbs on or off based on the amount of natural light or motion in the room providing hands-free control and energy savings.

With google home or alexa sold separately, the Cync mobile app, dimmer switches from C by GE make light control easy. Upgrade your smart home: the c by ge smart switch dimmer allows you to control your lights through touch, or voice assistant.
BrandGE Lighting #ad
ManufacturerGE Lighting #ad
Height6 Inches
Length4 Inches
Weight0.75 Pounds
Width3.5 Inches
Part NumberCSWDMOCBWF1/ST1P
Model48733
Warranty2 year parts/labor.

4. EverElectrix

#ad

Neutral Wire Required, Adjustable Timer, Title 24, UL Certified, Indoor In-Wall Occupancy Sensor with Wall Plate, 4 Pack, White, EverElectrix Motion Sensor Light Switch, Single Pole Only Not 3-Way

#ad
EverElectrix #ad - Neutral wire required; connect all 4 wires including Neutral Wire; Review your wiring setup prior to purchase. Save energy with automatic Off adjustable timer and adjustable sensitivity motion sensor; 180 degrees field of view.

Enhance safety and convenience with Manual On Vacancy Sensor or Automatic On Occupancy Sensor switching. We recommend consulting with a licensed electrician prior to purchase to ensure proper installation and compatibility. Fully certified and compliant: ul certified, FCC Listed and California Title 24 Compliant; Includes 1 in-wall motion sensor switch and 1 wall plate.
BrandEverElectrix #ad
ManufacturerEverElectrix Dependable Direct #ad
Height4.53 Inches
Length1.97 Inches
Width2.76 Inches
Part NumberGSDYTC1WT04

5. Lutron

#ad

Single Pole | MS-OPS2H-2-WH, 150W LED, White 2 Pack, Lutron Maestro Motion Sensor Switch | No Neutral Required

#ad
Lutron #ad - Automatically turns the lights on when you enter the room and off when you leave. Works with all bulb types; up to 250 watt incandescent, halogen, electronic low voltage 200 Watt magnetic low voltage 150 Watt CFL/LED 2 Amp ballasts.

Programmable time out of lights 1, 5, 15 or 30 minutes. Detects fine motion 2-3 times with up to 900 square feet of coverage. Features xct sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently. Single pole only; Great for small rooms like kitchens, laundry rooms and closets. Installs in as little as 15 minutes; ground wire is required, no neutral required. Includes 1 maestro sensor switch; Coordinating wallplate sold separately. Optional: senses daylight so lights do not turn on when there is enough natural light in the room.
BrandLutron #ad
ManufacturerLutron Electronics Company, Inc. #ad
Height4.25 Inches
Length1.6 Inches
Weight0.55 Pounds
Width1.75 Inches
Part NumberMS-OPS2H-2-WH
ModelMS-OPS2H-2-WH

6. GE Lighting

#ad

Single-Pole/3-Way, Dimmer Smart Switch, Smart Dimmer Switch Compatible with Google Home + Alexa, C by GE 3-Wire Smart Motion Sensor Light Switch, White, 1-Pack Packaging May Vary

#ad
GE Lighting #ad - With google home or alexa, dimmer switches from C by GE make light control easy. Smart dimmer switch: the c by ge smart switch dimmer allows you to control your lights through touch, the Cync mobile app, or voice assistant.

Make traditional light bulbs smart bulbs: the C by GE smart dimmer allows you to easily make your light bulbs compatible with Google Home or Amazon Alexa when paired with your smart devices. Build your smart home with smart bulbs that work with Alexa / Google Home: Cync and C by GE smart bulbs and the smart switch dimmer work with voice and app control at all times, even when the wall switch is turned off. Easy to use: this smart dimmer switch works with most common residential wiring ground wire required, and no neutral wire is required.

Save money and energy: motion and ambient light detection turn light bulbs on or off based on the amount of natural light or motion in the room providing hands-free control and energy savings. Diy installation takes about 30 minutes for this smart switch dimmer for incandescent, halogen, and LED lights.
BrandGE Lighting #ad
ManufacturerGE #ad
Height5.71 Inches
Length4.21 Inches
Weight0.65 Pounds
Width7.24 Inches
Part Number93120076
Model93120076
Warrantylimited warranty

7. ENERLITES

#ad

Motion Sensor Light Switch, Ultrasonic and PIR Dual Technology, Wall Plate Included, Enerlites MWOS-W Motion Sensor Switch, Occupancy Sensor, NEUTRAL WIRE REQUIRED, White

#ad
ENERLITES #ad - Single-pole use only. Major movement coverage: 1200sq ft. Minor movement coverage: 400sq ft. Combination of pir and ultrasonic sensors eliminates false positives by preventing lights from shutting off when the room is still occupied.

Ideal for private or executive offices, libraries, meeting rooms, classrooms, restrooms, and other spaces where limited movement is likely to occur to ensure the light does not shut off by itself. Customizable settings, detection range, such as adjustable time delay, light level. Ul listed. Dual technology motion light switch combines passive infrared PIR and ultrasonic sensors in one sensor switch for enhanced accuracy and to detect fine motion, such as typing, reading, etc.

Change between occupancy/vacancy modes and set different PIR/ultrasonic trigger modes and levels. Incandescent: 800W. Decorator wall plate included. 120/277vac. Neutral wire required for installation.
BrandENERLITES #ad
ManufacturerTop Greener Inc #ad
Height103.33 Millimeters
Weight0.31 Pounds
Width42.25 Millimeters
Part NumberMWOS-W-STICKERED
ModelMWOS-W

8. Lutron

#ad

Lutron MS-OPS6-DDV-WH Maestro 6-Amp Single Pole Dual Circuit Occupancy Sensing Switch, White

#ad
Lutron #ad - Requires ground wire. Independent control of settings per circuit enables you to simply adjust settings for each circuit to meet the needs of a space. 6 amps per circuit/4. 4 amps of fan loads per circuit in single pole applications. Simple push-button programming enables adjustments to be made quickly and easily to make the sensor work for your environment. Coordinating Claro wallplate not included.
BrandLutron #ad
ManufacturerLutron #ad
Height5.8 Inches
Length2.4 Inches
Weight0.2 Pounds
Width4 Inches
Part NumberMS-OPS6-DDV-WH
ModelMS-OPS6-DDV-WH

9. UltraPro

#ad

39348, UltraPro Z-Wave Plus Smart Light Switch, In-Wall White Paddles Built-In Repeater Range Extender ZWave Hub Required, Alexa and Google Assistant Compatible

#ad
UltraPro #ad - Quickfit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Simplewire – auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the switch accordingly.

Quickfit – improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups. Revolutionary, patent-pending design – QuickFit and SimpleWire technologies offer groundbreaking home automation features.

Voice control – enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub. Switch upgrade – easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF and create schedules for a wide range of fixtures. Unique advancements make the smart controls easier to install and more reliable than ever.
BrandUltraPro #ad
ManufacturerJasco Products Company #ad
Height4.1 Inches
Length1.75 Inches
Width1.75 Inches
Part Number43216-3803
Model39348
Warranty2-year limited

10. UltraPro

#ad

2, in-Wall Paddles | Built-in Repeater Range Extender | ZWave Hub Required-Alexa and Google Assistant Compatible, 54890, 2 Pack, UltraPro White Z-Wave Plus Smart Light Switch

#ad
UltraPro #ad - Unique advancements make the smart controls easier to install and more reliable than ever. Multi-switch compatible – the smart device operates perfectly on its own or seamlessly integrates into multi-switch setups when paired with compatible add-on switches from UltraPro, Enbrighten and Honeywell.

Quickfit – improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. Voice control – enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub. Switch upgrade – easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF and create schedules for a wide range of fixtures. Up to four add-on switches can be connected to the same light, GE, Jasco, fan or appliance.

Range extender – the in-wall z-wave switch repeats the signal from your hub or other Z-Wave device to extend wireless range by up to 150ft. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups. Revolutionary, patent-pending design – QuickFit and SimpleWire technologies offer groundbreaking home automation features. Black, brown, ivory and light almond options are also available. Changeable paddles – the switch features a removable white rocker-style paddle.
BrandUltraPro #ad
ManufacturerJasco Products Company #ad
Height4.15 Inches
Length1.92 Inches
Width2.14 Inches
Part Number54890
Model54890
Warranty5 Year Limited