Top 10 VFD inverter Single To 3 Phase – Electrical Motor Controls

As an Amazon Associate I earn from qualifying purchases.

1. SZCY LLC

#ad

AC 220V/2.2KW Variable Frequency Drive, 12A VFD Inverter Frequency Converter for Spindle Motor Speed Control Single-phase Input, 3 Phase Output

#ad
SZCY LLC #ad - 1 year replace or refund!!! . The operator panel can be moved out and extended by 2M, 1M, 1. 5m, 30cm. Three anti-paint protection lines, improve and extend the life of the fuselage.

Spacing 2. 54mm bar connector, 5-pin plug. Input voltage: 220v+/-15%; output voltage: 220vac; input frequency: 50/60 Hz; Output frequency: 0-400 Hz; Input phase: 1 phase; Output phase: 3 phase. Dc cooling fan low noise, large air volume. Application: spindle motor, lathe, fan, mach3, conveyors, drill press, Compressor, HVAC, Pumps, milling, CNC, Cooling, Three-phase motor and other machines!. The machine is screwed to ensure the safety and reliability of the use.
BrandSZCY LLC #ad
ManufacturerSZCY LLC #ad

2. MYSWEETY

#ad

MYSWEETY AC 220V/2.2KW 3HP 10A VFD Inverter Frequency Converter for Spindle Motor Speed Control 1 phase INPUT and 3 phase OUTPUT, Variable Frequency Drive

#ad
MYSWEETY #ad - The shell is slightly changed, the buttons are used correspondingly, and the operation is the same. Warranty: 1 Year replace or refund! Due to the vfd product is a flexibly configurable device, you are welcomed to consult with our CS make best choice for your exact application.

Input voltage: 220v+/-15%; output voltage: 220vac; input frequency: 50/60 Hz; Output frequency: 0-400 Hz; Input phase: 1 phase; Output phase: 3 phase. Simple to operate and wire, convenient for you to use. Application: spindle motor, cooling, milling, fan, Pumps, mach3, cnc, Drill Press, HVAC, lathe, conveyors, Compressor, Three-phase motor and other machines!. This is single phase vfd with 1 phase input and 3 phase output, 10a, the power is 2. 2kw, 220v, vfd dimension: 130 x 103 x 200 mm L x W x H.
BrandMYSWEETY #ad
ManufacturerMYSWEETY #ad
Part Number202549-US2

3. LAPOND

#ad

LAPOND High Performance VFD Inverter VFD Drive 7HP 5.5KW 220V 20A,Variable Frequency Drive for Motor Speed Control,SVD-PS Series5.5KW

#ad
LAPOND #ad - This new series has better performance vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency; work well with CNC controller, say Mach3 controller, support fast accelerate/deccelerate with external optional braking resistor and external potentiometer.

Application : spindle motor, compressor, lathe, elevator, mixer, slitter, conveyors, treadmills, extruder, pumps, milling, winding machine, ventilator, centrifuger and other speed control machines. Due to the vfd product is a flexibly configurable device, you are welcomed to consult with our CS make best choice for your exact application.

This is single phase vfd with single phase 220v input and three phase 220V OUTPUT, only work with three phase asynchronous motor, If your motor is heavy load, pls choose a higher Horsepower vfd than your motor's or contact sales for model selection suggestion. Rich of digital and analogy control terminals for versitile control, optional MODBUS RS485 extension, well controlled fans produce low acoustics noise.
BrandLAPOND #ad
ManufacturerLAPOND #ad

4. TwoWin

#ad

Variable Frequency Drive, TwoWin AC 2.2KW 220V VFD 3HP 10A VFD Inverter Frequency Converter for Spindle Motor Speed Control 1 phase Input 220V and 3 phase Output 220V

#ad
TwoWin #ad - Meet user requirements for low noise and low electromagnetic interference. The frequency converter adopts a unique control method, humidity and dust interference, high precision and wide speed range driving, which can realize high torque, temperature, and has high performance.

Applications : spindle motors, mixers, extruders, fans, three-phase motor cutting machines, pumps, drilling machines, conveyors, grinders, compressors, cnc lathes, centrifuges and other speed regulators. Input voltage : 220v+/-15% ; output voltage : 220vac; input phase: 1 phase; output phase: 3 phase. For yl600 inverter, our parameters are set to 50hz by default. It can adapt to harsh power, greatly improving stability.

If you directly restore the factory settings, P03. 13 = 400hz, the inverter can be used with 50HZ motors. Warm reminder : if you need to program or have any questions before operating the inverter, we will try our best to help you, please consult our team of technical experts, thank you!The inverter has 1-Year warranty from the date of purchase!. If your motor needs to rotate at high speed, p0009 = 4. 0hz, p0004 = 400hz, p03.
BrandTwoWin #ad
ManufacturerTwoWin #ad

5. LAPOND

#ad

LAPOND SVD-ES Single Phase VFD Drive VFD Inverter Professional Variable Frequency Drive 2.2KW 3HP 220V 10A for Spindle Motor Speed Control VFD-2.2KW

#ad
LAPOND #ad - B>important note: updated version that ai1 terminal are available, says can not add braking resistor ;, says safely add external potentiometer. The vfd only work with 3 phase 220v asynchronous motors; it has not internal braking control unit, AO1 terminal is NOT available at this moment; Fan runs all the time when VFD power on;the extension cord/cable does NOT include.

It can be used as a motor speed control and a phase converter ;Warranty: 1 Year replace or refund! Application: spindle motor, conveyors, drill press, Pumps, mach3, Lathe, Fan, Compressor, HVAC, Milling, CNC, cooling, Three-phase asynchronous motors. Due to the vfd product is a flexibly configurable device, you are welcomed to consult with our CS make best choice for your exact application.

This vfd can be used for constant torque loads such as hard starting: Air compressors, fans, HVAC units and variable torque loads such as pumps, etc. This is single phase vfd with 1 phase 220v input and 3 phase 220v output, 10a, 220v, the power is 2.2kw, 3hp, vfd dimension: 100 x 117 x 150 mm L x W x H.
BrandLAPOND #ad
ManufacturerSiyan #ad
Height4.61 Inches
Length4.33 Inches
Width5.91 Inches
Part NumberSVD-E
ModelSVD-E

6. HY HUANYANG

#ad

HY HUANYANG CNC VFD 220V 4.0KW 5.0HP Variable Frequency Drive Motor Inverter Converter for Spindle Motor Speed Control

#ad
HY HUANYANG #ad - Frequency:0-50hz/60hz. If there are problems in use after you receive, please don't give us negative or natural feedback. Please contact us as soon as possible, we will help you solve problems or help you replace new one. If you have no experience in driving a vFD, be sure to refer to the instructions before operating a VFD, otherwise it is easy to damage the VFD.

Output:3phase 220v. Application motor :cnc router, ventilator, elevator, compressor, slitter, grinder, CNC machine, winder, wingding machine, mixer, drilling machine, extruder, conveyor, milling machine, pump, centrifuger and other speed control machines. 0-400hz. You can just connected l1/L2 to any two of VFD input R/S/T. Important note: ●this vfd is only applicable to three phase asynchronous motor●dont support external resistorthe function needs to be customized by notifying the seller before purchase.

Fan runs all the time even though the motor stop. If your motor is heavy load, pls choose a higher horsepower vfd than your motor's or contact sales for model selection suggestion●If your motor is 50/60hz, you need to change the Hertz parameter of the VFD to be consistent with the motor. Input:1 or 3 phase 220v.
BrandHY HUANYANG #ad
ManufacturerHuanyang Electrical #ad
Height5.9 Inches
Length8.7 Inches
Weight5.5 Pounds
Width6.7 Inches
ModelHY04D023B

7. HY HUANYANG

#ad

110V, VFD 110V Input 2.2KW 3hp Variable Frequency CNC Drive Inverter Converter for 3 Phase Motor Speed Control 2.2KW

#ad
HY HUANYANG #ad - 0-400hz. Frequency:0-50hz/60hz. Output:3phase 110v. Input:1phase or 3 phase 110v. You only need to adjust the hertz parameters  to match  your motor to connect it to useThe VFD defaults is 400 Hz.

All the vfd parameters  are set before purchase. Important note: ●this vfd is only applicable to three phase 110v asynchronous motor●dont support external resistorif need pls contact the seller for customization before purchase. Fan runs all the time even though the motor stop. If your motor is 50/60hz, you need to change the Hertz parameter of the VFD to be consistent with the motor.

If there are problems in use after you receive, please don't give us negative or natural feedback. Please contact us as soon as possible, we will help you solve problems or help you replace new one. If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.
BrandHY HUANYANG #ad
ManufacturerHuanyang Electrical #ad
Height6.3 Inches
Length6.7 Inches
Width5.1 Inches
Part NumberHY02D211B
ModelHY02D211B

8. GEARFLAG

#ad

GEARFLAG Inverter VFD Drive 1.5KW 220V 2HP Variable Frequency Drive 3 Phases for Spindle Motor Speed Control 1.5KW

#ad
GEARFLAG #ad - Compact size, 5. 2" x 2. 6" x 3. 7" h x w x D. Input: 1-phase ac110 - 220V. Output: 3-phases 075kw-1. 5kw, 7a range: 0 ~ 220v; frequency range: 01 - 400hz / hp: 1. 5kw 2hP. Programmable, forward / Reverse functions. Turning knob, external wired control panel for FREE, Forced cooling fan.
BrandGEARFLAG #ad
ManufacturerGEARFLAG #ad
Height5.2 Inches
Length3.8 Inches
Width2.6 Inches
Part NumberGFNZ1001R5G2

9. VEVOR

#ad

VEVOR Control CNC VFD 220V 2.2KW 3HP Variable Frequency Drive 15A CNC Motor Drive Controller Inverter Converter 400 Hz 1 or 3 Phase Input 3 Phase Output for Spindle Motor Speed Control

#ad
VEVOR #ad - There is enough space for heat dissipation between electronic components, which has a longer service life. Smart digital display - adopting user-friendly keyboard design & reasonable layout, easy to operate; digital display, intuitive and clear. Specific parameters- inpute voltage: 220v, inpute frequency: 48-63 hz, output voltage: 208-240VAC analogous to Input Voltage, outpute frequency: 0-400 Hz, inpute phase: 1 or 3 phase as you like, Outpute Phase: 3 phase.

Low-noise operation- the phase converter features low noise and low electromagnetic interference, and the shell adopts porous heat dissipation, through the optimization of PWM control technology and electromagnetic compatibility of the overall design. The detachable design is convenient for remote control. Versatile use- the main application area involves spindle motor, conveyor, rewinder, milling machine, grinder, compressor, ventilator, mixer, CNC machine tool, CNC engraving machine, centrifuges, Speed regulators such as elevators cannot be used for passenger elevators, extruder, pump, slitting machine, trimming machine, drilling machine, cnc milling machine, etc.

Multiple protection- take advantage of various protection ways such as overload protection, stall protection, restart protection, over-voltage DC voltage>400V, or under-voltage DC voltage
BrandVEVOR #ad
ManufacturerVEVOR #ad
Height5.1 Inches
Length7.5 Inches
Width7.1 Inches
Part Numbervfd 2.2 220v

10. ICROATO

#ad

CNC 2.2KW VFD Variable Frequency Driver,PWM control spindle inverter AC220V 2.2KW Single Phase Input Three-phase OutputVFD-2.2KW

#ad
ICROATO #ad - By optimizing the overall design of PWM control technology and electromagnetic compatibility, the user's environmental requirements for low noise and low electromagnetic interference are met.

Compared with ordinary frequency converters, this model has strong anti-tripping performance. Input voltage: 220v+/-15%; output voltage: 220vac; input frequency: 50/60 Hz; Output frequency: 0-400 Hz; Input phase: 1 phase; Output phase: 3 phase. The unique control method is adopted to realize high torque, high precision and wide speed control. Perfectly adapted to the harsh grid, temperature, humidity and dust interference working environment.
BrandICROATO #ad
ManufacturerICROATO #ad