Top 10 Spiral Upcut Router Bit 1/4 – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. Whiteside Router Bits

#ad

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Industrial Quality. Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Weight0.06 Pounds
Width3 Inches
Part NumberRU2100
ModelRU2100

2. Freud

#ad

Freud 1/4" Dia. Solid Carbide Up Spiral Bit with 1/4" Shank 75-102

#ad
Freud #ad - Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. D 1/4", 2 flutes, cutting length h 1", 1/4" Shank. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Overall dia.
BrandFreud #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.08 Pounds
Width1 Inches
Part Number75-102
Model75-102

3. SpeTool

#ad

1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits. Industrial quality control to ensure best performance. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPD1/4-1/4-U

4. Whiteside Router Bits

#ad

Whiteside Router Bits RU4700 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM. Industrial Quality.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Weight0.11 Pounds
Width3 Inches
Part NumberRU4700
ModelRU4700

5. Yonico

#ad

Yonico 31215-SC 1/4-Inch Dia. 2 Flute Upcut Spiral End Mill CNC Router Bit 1/4-Inch Shank

#ad
Yonico #ad - For standard cnc milling and routing where material removal and efficiency is required. Polished to a mirror finish from a solid carbide rod for precision & accuracy. Used for: standard milling, dadoing, and boring. Premium c3 micro-grain solid tungsten carbide for a high-performance industrial quality tool. For use on cnc, table mount and handheld routers.
BrandYonico #ad
ManufacturerYonico #ad
Height0.25 Inches
Length2.5 Inches
Weight0.02 Pounds
Width0.25 Inches
Part Number31215-SC
Model31215-SC
WarrantyLimited Lifetime Warranty

6. TACKPRO

#ad

Spiral Flush-Trim Router Bits,Solid Carbide Flush Trim Router Bit 1/4-Inch Shank Spiral Flush Trim Up Cut from TACKPRO

#ad
TACKPRO #ad - Up-cut spiral router Bits Redesigned with permanent bearing retaining collar to reduce trimming mishaps. Industrial quality router bits provide precise, efficient cuts and offers extreme durability.

Wide range of use for use with soft & hard woods, laminates, ply-woods, composites, plastics and some non-ferrous metals. Lifetime warrantytackpro are committed to provide the best service for our customers on Amazon, if you have any problems please feel free to contact us, we are take responsible to our items, we will help you and provide you lifetime quality guarantee. Industrial quality router bits made of solid Carbide, with C3 Micro-grain Tungsten Carbide Cutters. Perfect size trim router BitsShank: 1/4inch, Cut Length: 1inch.
BrandTACKPRO #ad
ManufacturerTACKPRO #ad
Length3 Inches
Weight0.11 Pounds
Width0.25 Inches
Part NumberB07SXWGPL2

7. SpeTool

#ad

SpeTool Spiral Router Bits Up Cut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

#ad
SpeTool #ad - The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/4-U

8. SpeTool

#ad

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, Carving, 1 inch Cutting Length 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut

#ad
SpeTool #ad - Industrial quality control to ensure best performance. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 3 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSPD1/4-1/4-U

9. CMT

#ad

1/4-Inch Shank,Silver, 1/4-Inch Diameter by 2-1/2-Inch Length, CMT 191.008.11 Solid Carbide Upcut Spiral Bit

#ad
CMT #ad - Also for use on hand-held routers equipped with chucks or adaptors. 1-inch cutting length, 2 Cutting Edges, Right-Hand Rotation. Premium quality solid Carbide, Excellent finish on the workpiece lower side Upward chip ejection. For use on machining centers, point to point machines, CNC routers. For cutting, copying, sizing and routing wood products, plastic & laminates.
BrandCMT #ad
ManufacturerCMT #ad
Height0.25 Inches
Length2 Inches
Weight0.1 Pounds
Width0.25 Inches
Part Number191.008.11
Model191.008.11
WarrantyCMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

10. SpeTool

#ad

SpeTool CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, Carving, 1/4 inch Shank HRC55 Solid Carbide End Mill for Wood Cut

#ad
SpeTool #ad - Spiral bits used for smoothly upcut groove and slots, Cycles and dados leave with clean edge and top surface, Mortises, better than straight bits. Solid carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1/2 inch cutting length, 2 inch for total length. Industrial quality control to ensure best performance. For plywood, mdf, oak, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/8-U