Top 10 Router Table Insert Plate – Router Templates

As an Amazon Associate I earn from qualifying purchases.

1. Kreg

#ad

Kreg Tool Precision Router Table Insert Plate w/Level-Loc Rings non predrilled PRS4038

#ad
Kreg #ad - Measures 9-1/4" x 11-3/4" 235mm x 298mm; 3/8" thick 9. 5mm phenolic insert plate. Level-loc Reducing Rings. Alignment marks make it easy to center and mount on almost any router. Available in 3 versions: undrilled, pre-drilled for Triton, and pre-drilled for Porter-Cable and Bosch. Comes without any predrilled mounting holes.
BrandKreg #ad
ManufacturerKreg #ad
Height12.5 Inches
Length12.24 Inches
Weight3 Pounds
Width13.74 Inches
Part NumberPRS4038
ModelPRS4038

2. Kreg

#ad

Kreg Tool Precision Router Table Insert Plate w/Level-Loc Rings predrilled for Bosch & Porter Cable Routers PRS4036

#ad
Kreg #ad - Measures 9-1/4" x 11-3/4" 235mm x 298mm; 3/8" thick 9. 5mm phenolic insert plate. Comes w/ predrilled holes and mounting hardware to fit the Porter-Cable 690/890 Series, and Bosch 1617. Available in 3 versions: undrilled, pre-drilled for Triton, and pre-drilled for Porter-Cable and Bosch. Level-loc Reducing Rings. Alignment marks make it easy to center and mount on almost any router.
BrandKreg #ad
ManufacturerKreg #ad
Height1.25 Inches
Length13.45 Inches
Weight2.97 Pounds
Width12.1 Inches
Part NumberPRS4036
ModelPRS4036

3. TCBWFY

#ad

Aluminum Router Table Insert Plate for Popular Trimmers Routers DIY Woodworking with 4 Rings and Screws for Woodworking Benches Router Table Plate Mounting Base Plate

#ad
TCBWFY #ad - Convenient center-hole bushing used to the router so it is centered in the bit hole. Practical in use and not easy to rust. Easy and convenient to operate. A helper of diy woodworking at home. It is easy to use and make the work be well done. Make accurately drilling and mounting any router easy. Made of aluminum alloy, firm and long-lasting to use. A set of woodworking bench tools includes 1 router table insert plate, 4 pieces router insert rings and some fixing screws. Polished surface, smooth and not rusty.
BrandTCBWFY #ad
ManufacturerTCBWFY #ad
Part NumberRouter Table Insert Plate

4. GanGou

#ad

Router Table Insert Plate,Router Templates, Table Insert Plate Aluminum Board Trimming Machine Flip Board for Woodworking, Trimming Machine Flip Board Woodworking Trimming Machine

#ad
GanGou #ad - You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply. Easy-to-use woodworker milling table inserts. Warning!!!!!!--please check the size of our plate to make sure if it matches your router. Please pay attention to the size before buying. It is easy to use and make the work be well done. Lifetime warranty, 100% Satisfaction Guarantee. A helper of diy woodworking at home. Made by aluminium alloy, durable and not easy to rust.
BrandGanGou #ad
ManufacturerGANGOU #ad
Height0.31 Inches
Length9.25 Inches
Width4.72 Inches
Part NumberRouter-1

5. AXABING

#ad

Router Table Insert Plate Aluminum Red Board Trimming Machine Flip Board for Woodworking, 62x70mm

#ad
AXABING #ad - Wide range of uses: multi-function insert plate, suitable for high-precision woodworking. Easy installation: a convenient center hole bushing that aligns the router so that it can centered on the drill hole. Superior material: router plate insert made of red aluminum alloy, not easy to rust and long service life, wood trimming machine.

Do not rule out the situation that special models can't use. Size description: 235mm x 120mm x 8mm / 9. 3''x 4. 7''x 03''. This router table insert plate can be used in general electric routers. You can refer to the sizes in the pictures and the distance between the holes of your electric router then choose the proper type you want.

Drill and install router easily and accurately. Note: our products are not suitable for the makita router. Package includes: 1x complete filp chip board; 2x circular positioning rings; 1x stainless steel 5/8 bushing. Please contact us with any questions, thank you! It is easy to operate, suitable for making its own boring and milling table, save effort and expand the use of the trimming machine at the same time.
BrandAXABING #ad
ManufacturerAXABING #ad

6. Deadwood Crafted Tools

#ad

3-7/8, 2-5/8, 1-1/4 Inches – Cutter & Porter-Cable Template Guide, DCT Universal Router Table Saw Insert Base Plate Kit

#ad
Deadwood Crafted Tools #ad - Built to last: constructed from durable phenolic plastic to securely hold any router without flexing or warping when storing your router on not inside the table; Plastic material makes it easy to drill holes for a custom router fit. Easy to install: 9-inch x 12-inch 22. 9cm x 305cm plate with pre-drilled table mounting holes; includes magnets and adjusting screws for securing and leveling the plate; 2 removable concentric rings allow for easy alignment when installing your router and give three different bit openings 3-7/8, 2-5/8, 1-1/4-inch 9.

8cm x 6. 7cm x 3. 2cm; underside is marked for centering the router prior to drilling. Fits most cutters: 3/8-inch thick 1cm phenolic router plate supports any router with removable baseplate; 3 snap out bit ring openings 3-7/8 inches black for large raised panel cutters, 2-5/8 inches yellow for medium to large cutters, 1-1/4 inches red for small cutters and Porter-Cable template guides; Steel starting guide pin allows routing curved work.

Contents: package includes everything you need to mount your router to a table; 1 router plate, 1 Allen wrench hex key, and 4 screws; Router required, 1 guide pin, 4 magnetic holders, not included. Build a table-mounted router: the dct universal router table saw insert base plate kit, 2-5/8, 3-7/8, 1-1/4” Inches – Cutter & Porter-Cable Template Guide lets you build your own table-mounted router safely so you can easily lift the router out of the table to change bits and safely operate; Gives you a mobile machined surface.
BrandDeadwood Crafted Tools #ad
ManufacturerDeadwood Crafted Tools #ad
Height10.3 Inches
Length0.6 Inches
Weight1.06 Pounds
Width17.7 Inches
Part Number9183
WarrantyThis product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

7. BOSCH

#ad

Bosch Parts 2610938414 Adapter Plate

#ad
BOSCH #ad - Fits various Bosch Parts models. Oem part number 2610938414. This is a Bosch Parts replacement part. Part number 2610938414. Authorized part. This is an o. E. M.
BrandBOSCH #ad
ManufacturerBosch Service Parts #ad
Height0.25 Inches
Length11.25 Inches
Width9 Inches
Part Number2610938414
Model2610938414

8. PIAOPIAONIU

#ad

PIAOPIAONIU Router Table Insert Plate Aluminum Red Board Trimming Machine Flip Board for Woodworking

#ad
PIAOPIAONIU #ad - Attention--please check the distance between the mounting holes to make sure if it fits your router. The detailed size is on the picture. Checking the detailed size on the picture!!!). Wide use--multi-function insert plate, suitable for high-precision woodworking.

It is easy to operate, suitable for making its own boring and milling table, save effort and expand the use of the trimming machine at the same time. Checking the detailed size on the picture!!!). Material--router plate insert made of red aluminum alloy, not easy to rust and long service life, wood trimming machine.

Checking the detailed size on the picture!!!). Easy installation--a convenient center hole bushing that aligns the router so that it can centered on the drill hole. Drill and install router easily and accurately. Checking the detailed size on the picture!!!). Size--234*120*8mm/9. 2*4. 72*031inch(checking the detailed size on the picture!!!).
BrandPIAOPIAONIU #ad
ManufacturerBaizhou Xu #ad
Weight0.22 Pounds
Part Numberjgjhjh5438

9. Tenluno

#ad

235 x 120 x 8mm Aluminum Router Table Insert Plate with 4 Rings and Screws for Woodworking Benches, Router Table Insert Plate

#ad
Tenluno #ad - Not easy to rust and long service life, wood trimming machine. Drill and install router easily and accurately. Note: our products are not suitable for the makita router. Size--234*120*8mm/9. 2*4. 72*031inchchecking size on the pictuRE!!! A set of woodworking bench tools includes 1 router table insert plate, 4 pieces router insert rings and some fixing screws. Do not rule out the situation that special models can't use. A convenient center hole bushing that aligns the router so that it can centered on the drill hole.
BrandTenluno #ad
ManufacturerTenluno #ad

10. PIAOPIAONIU

#ad

PIAOPIAONIU 1 Set Router Table Insert Plate,Aluminum DIY Router Table for Woodworking

#ad
PIAOPIAONIU #ad - Attention--please check the size of our plate to make sure if it matches your router. The detailed sized is on the second picture. The unit of measurement is mm.

Warning!!!!!! Size--234*120*8mm/9. 2*4. 72*031inchchecking size on the pictuRE!!! Convenient to use--threaded allen wrench inserts in each corner help you level and easily adjust the router insert with your table. Checking size on the picture!!! Material--the router table insert plate made of aluminum alloy, durable and not easy to rust. Checking size on the picture!!! . Safety--inverting your router in a router table allows for safer and more versatile operations. Checking size on the picture!!! .
BrandPIAOPIAONIU #ad
ManufacturerBaizhou Xu #ad
Weight0.02 Pounds
Part Numbernbvmh5464