Heavy Duty Gas Springs Lid Support Hinge, Pack of 2 Pneumatic Lid Lifters 200N/44lb, Perfect for Heavy Drop Lids, with Soft Close#adBeikalone #ad - Heavy duty gas springs lid support hinges is designed to support heavy drop lids of chest, toy box, heavy bench lid, etc, great to make soft close. Recommendation: our pneumatic Lid Lifters work perfect on the lids between 40lb-50lb.
Storage Chest/Trunk/Bench Lid Stay,Set of 2Black, Fpz 200N/44lb Gas Strut Lift Support Soft Open & Down Lid Support Gas Strut,Gas Spring,Gas Shocks,Lid Hinge for Tool Box#adFpz #ad - Stable support: lids soft open gently, angle up to about 100 degrees. Not soft close. Force:200n/44lb per strut; length from hole center to the other: 9-11/16 '', travel: 3-14/25 '', distance between ball mounts compressed; 6-1/8''.
Bench Seat Hinge for Toy Chest Heavy Duty No Slam Safety Torsion Hinge Lid Support Stay Hinge#adPinnacle #ad - This specially manufactured lid support won't let the lid fall. This built-in stopper makes this lid support more secure and ensures that lid is stable after opening. Safe and secure: this soft close hinge is specially designed to prevent pinched fingers, so it will never slam shut to your child.
Built-in feature: this metal no slam lid support features a built-in stopping mechanism which prevents seat top from slamming on fingers.
High raising: this metal lid support is specially designed for safety purpose and design of hinge ensure that seat top raised position is at over- center 95-degree angle to prevent lid from falling unexpectedly. 2 in 1 hinge and lid stay/support hinge in 1 piece. No metal visible on outside of your toy chest or bench. See installation images.
|Manufacturer||Pinnacle Woodcraft #ad|
Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2#addouper #ad - Hinges will not work if your lid doesn’t match specified dimension and weight requirement. Strong enough -- douper 200n heavy duty gas struts can support maximum 30lbs lid and lower gently; Weight support will be doubled with 2 hinges 60lbs/ 2pcs.
Warm tips -- douper hinges will not applicable with the lid at width more than 50” and height over 25”. And must with a 9 inch clearance.
Gently close design -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. 75°-105° open angle -- each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation. Never worry again about having to prop the lid open.
Soft Close Hinges, Gas Spring, Lift Supports, Toy Box Hinges, Lid Support, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring, Gas Strut, Pressure 120N, Gas Shocks#adSEN #ad - If you need to adjust the direction of the joint, not upside-down, you can only turn it to the right. It is recommended: one for cabinet door width 600mm/23. 6in to achieve parallel opening and closing synchronization. And the small one cannot hold the cabinet door, Choose the model and quantity according to the weight of the actual cabinet door panel.
Stable & no rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.
Install the nail plate and insert the ball into the plastic hole. Pressure:120n/26lb/12kg per strut;length hole center to hole center :9-11/16'';travel:3-14/25'', 12kg, it is not suitable for use. 1. The gas spring piston rod must be installed in the downward position, which can reduce friction and ensure the best damping quality and cushioning performance. You can remove the metal clip with a screwdriver or a screw when you need not to use.
RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs#adRyf #ad - Max weight of lid stay--40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side. Easy to install lid hinge --the lid hinge is used for side mounting and top mounting.
Soft close stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting. Installing screws and Allen wrench in package.
Three Folding Hardware Hinge for Door, Furniture, Vintage Jewelry Chest, Cabinet, Antique Bronze Hinges, Yetaha 2 Pcs Decorative Box Hing with 12 Screws#adYetaha #ad - Package list: 2 x Hinges; 12 x Screws. Size: approx. Material: Zinc Alloy. Perfect for vintage wooden box, vintage jewelry chest, wardrobe, cabinet, door, bin, suitcase, cabinet etc.
Lid Support Hinge for Toy Box, Easy Install, VOCOMO Lid Stay 105 Degree Open with Soft Close#adVOCOMO #ad - This lid stay will hold the lid open until you are ready to close. Each hinge can be used for right or left side mounting. 105 degree open - the lid hinges supports opening the lid at a maximum Angle of 105 degree. Easy to install - easy to follow graphic installation instructions ensure a perfect install the first time.
Soft Close Lid Support Hardware for Storage Bench & Toy Box Lids, Drop Cabinet Doors 1 Pair 2 Total Safely Supports 20lbs Supplements Flat Folding Hinges, by Pinnacle Woodcraft#adPinnacle #ad - Durable: the heavy duty zinc alloy hardware supports up to 20 lbs. Prevents pinched fingers: the adjustable hex screw allows for the setting of the soft closing tension to the weight of unit.
Hardware included: 1 pair2 total of soft close arms and all the mounting hardware along with a hex wrench for adjusting the arm tension and the opening angle. Flexibe installations: the support hardware allows for right or left installations; adding the safe closing feature to toy benches, bench seats, storage benches, and drop cabinet doors.
|Manufacturer||Pinnacle Woodcraft #ad|
Kocent Lid Stay 105 Degree Open with Soft Close Easy Install Folding Lid Stay Hinge keep The Lid open Without Smashing Fingers Perfect for Toy Box/Drawer/Window/Wardrobe/Cabinet Door#adKocent #ad - Perfect for any lids or flaps, our U shape Positioner works great on preventing falling when the door open. Easy install - redesign installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
One is enongh - made of premium quality zinc alloy, anti-rust, strong and durable, corrosion-resistant， And we are strongly suggest that please don’t use this product on any lid that over 8 LB/PC if you have a strong need of slow slide motion, cause that will dispointed you.
Package quantity: 1 x lid stay. 100% money-back guarantee - if for whatever reason you are unhappy with the product we will refund you, no questions asked! 6 month package returned, a year nationwide warranty！. Compact design - the compact design is great for installation in tight fit areas.