Heavy Duty Gas Springs Lid Support Hinge, Perfect for Heavy Drop Lids, with Soft Close, Pack of 2 Pneumatic Lid Lifters 200N/44lb#adBeikalone #ad - Max weight support--50lb/2pcs, Pressure: 200N/44lb Per Strut. Made of durable cold-rolled steel in Satin Nickel. Recommendation: our pneumatic Lid Lifters work perfect on the lids between 40lb-50lb. Heavy duty gas springs lid support hinges is designed to support heavy drop lids of chest, toy box, heavy bench lid, etc, great to make soft close.
Fpz 200N/44lb Gas Strut Lift Support Soft Open & Down Lid Support Gas Strut,Gas Spring,Gas Shocks,Lid Hinge for Tool Box, Storage Chest/Trunk/Bench Lid Stay,Set of 2Black#adFpz #ad - Not soft close. Stable support: lids soft open gently, angle up to about 100 degrees. Force:200n/44lb per strut; length from hole center to the other: 9-11/16 '', travel: 3-14/25 '', distance between ball mounts compressed; 6-1/8''.
Bench Seat Hinge for Toy Chest Heavy Duty No Slam Safety Torsion Hinge Lid Support Stay Hinge#adPinnacle #ad - This built-in stopper makes this lid support more secure and ensures that lid is stable after opening. Heavy duty: maximum lid weight of this hinge is 30 lbs to keep your lid from slamming, so this heavy duty lid support is ideal for industrial use like storage containers and trunks.
Safe and secure: this soft close hinge is specially designed to prevent pinched fingers, so it will never slam shut to your child.
High raising: this metal lid support is specially designed for safety purpose and design of hinge ensure that seat top raised position is at over- center 95-degree angle to prevent lid from falling unexpectedly. No metal visible on outside of your toy chest or bench. See installation images.
|Manufacturer||Pinnacle Woodcraft #ad|
Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2#addouper #ad - Note: no adjustments on placement measurements of the hinge mounted on side board. And must with a 9 inch clearance. 75°-105° open angle -- each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation.
Hinges will not work if your lid doesn’t match specified dimension and weight requirement.
Never worry again about having to prop the lid open. Gently close design -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Warm tips -- douper hinges will not applicable with the lid at width more than 50” and height over 25”.
Toy Box Hinges, Lid Support, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring, Gas Spring, Gas Shocks, Gas Strut, Lift Supports, Soft Close Hinges, Pressure 120N#adSEN #ad - Avoid the loss of gas in the cavity 3. The connection point should be installed flexibly without jamming. 1. The gas spring piston rod must be installed in the downward position, which can reduce friction and ensure the best damping quality and cushioning performance. Pressure:120n/26lb/12kg per strut;length hole center to hole center :9-11/16'';travel:3-14/25'', distance between ball mounts compressed: 6-1/8".
Install the nail plate and insert the ball into the plastic hole. Stable & no rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.
2. The gas spring piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, not upside-down, you can only turn it to the right. You can remove the metal clip with a screwdriver or a screw when you need not to use. It is suit for heavier kitchen cabinet, bedroom trunks, toy box or storage box under window bench seat as well as folding table for RV.
RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs#adRyf #ad - Soft close stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting. Durable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function.
Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Easy to install lid hinge --the lid hinge is used for side mounting and top mounting.
Cabinet, Vintage Jewelry Chest, Furniture, Three Folding Hardware Hinge for Door, Yetaha 2 Pcs Decorative Box Hing with 12 Screws, Antique Bronze Hinges#adYetaha #ad - 43*17mm/1. 69*067inch. Package list: 2 x Hinges; 12 x Screws. Color: Antique bronze. Please pay attention to the size and take compatibility into account before purchasing.
VOCOMO Lid Stay 105 Degree Open with Soft Close, Easy Install, Lid Support Hinge for Toy Box#adVOCOMO #ad - Each hinge can be used for right or left side mounting. Soft close - lids will lower slowly and gently to avoid slams shut and crush the little fingers of children. 105 degree open - the lid hinges supports opening the lid at a maximum Angle of 105 degree.
Drop Cabinet Doors 1 Pair 2 Total Safely Supports 20lbs Supplements Flat Folding Hinges, by Pinnacle Woodcraft, Soft Close Lid Support Hardware for Storage Bench & Toy Box Lids#adPinnacle #ad - Flexibe installations: the support hardware allows for right or left installations; adding the safe closing feature to toy benches, bench seats, storage benches, and drop cabinet doors.
Hardware included: 1 pair2 total of soft close arms and all the mounting hardware along with a hex wrench for adjusting the arm tension and the opening angle. Durable: the heavy duty zinc alloy hardware supports up to 20 lbs. Per pair, and easily supports wooden bench lids up to five feet long when used along with flat folding hinges.
|Manufacturer||Pinnacle Woodcraft #ad|
Kocent Lid Stay 105 Degree Open with Soft Close Easy Install Folding Lid Stay Hinge keep The Lid open Without Smashing Fingers Perfect for Toy Box/Drawer/Window/Wardrobe/Cabinet Door#adKocent #ad - One is enongh - made of premium quality zinc alloy, corrosion-resistant， And we are strongly suggest that please don’t use this product on any lid that over 8 LB/PC if you have a strong need of slow slide motion, anti-rust, strong and durable, cause that will dispointed you.
Perfect for any lids or flaps, our U shape Positioner works great on preventing falling when the door open. These elegant form of support hinges are well made and designed to support the lids of small box, cabinet, such as toy box, closet, wardrobe lids.
Compact design - the compact design is great for installation in tight fit areas. Easy install - redesign installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.