Top 10 Horizontal Router Table – Router Tables

As an Amazon Associate I earn from qualifying purchases.

1. MLCS

#ad

MLCS 9767 The Flatbed Horizontal Router Table

#ad
MLCS #ad - Rout wide stock flat on the Table for Safety. Perfect for vertical raised Panels, Moldings, Mortise and Tenon Joinery, Picture Frames and many more. Makes tall auxiliary Fences, Multiple Featherboards and Jigs Unnecessary. No more standing Stock on Edge. Benchtop table featuring micro-adjustable bit height adjustments.
BrandMLCS #ad
ManufacturerMLCS #ad
Height7 Inches
Length26.5 Inches
Weight31.53 Pounds
Width20.5 Inches
Part Number9767
Model9767

2. Woodhaven

#ad

Woodhaven 6000 Horizontal Router Table

#ad
Woodhaven #ad - Assembled size 23-3/4" wide, 18" deep and 24" tall. Router not included. 6000 has a maximum 9" bit adjustment range above the table to bit center. A horizontal router table is the safest choice for mortise & tenons, vertical panel bits and more.

Knobs on crank brace provide easier & faster coarse height adjustments. Made in the USA! Lifetime guarantee against defects in material or workmanship. Hold-down and hold-in included for safe and consistent results when machining moldings. Without a router installed. 2-1/2" shop vac hookup with under-table dust channels to help direct debris to the outlet.

Choose the 6000 model for most work, long moulding bits, or the 6002 or 6004 Angle-Ease model see 1470 Angle-Ease for details for their unique angling capabilities. Router not included. Weighs 30 lbs. Unit clamps or bolts clamps or bolts not included to a workbench. Solid phenolic sides provide greater stability and strength.
BrandWoodhaven #ad
ManufacturerWoodhaven #ad
Part Number6000

3. Woodhaven

#ad

Woodhaven 6004 Horizontal Router Table & 4.2" Angle-Ease

#ad
Woodhaven #ad - Router not included. Hold-down and hold-in included for safe and consistent results when machining moldings. Choose the 6000 model for most work, long moulding bits, or the 6002 or 6004 Angle-Ease model see 1470 Angle-Ease for details for their unique angling capabilities.

Knobs on crank brace provide easier & faster coarse height adjustments. Solid phenolic sides provide greater stability and strength. Without a router installed. Unit clamps or bolts clamps or bolts not included to a workbench. Made in the USA! Lifetime guarantee against defects in material or workmanship. The 6004 angle-ease model allows you to tilt the router up to 45º up or down and holds any router with a 4. 2" diameter motor not included like the Porter Cable 7518.

Assembled size 23-3/4" wide, 18" deep and 24" tall. 6004 has a maximum bit adjustment above the table of 6-3/4" to 11-1/2" measured at 90º - depends on orientation of Angle-Ease on the plate to bit center. Router not included. Weighs 34 lbs. 2-1/2" shop vac hookup with under-table dust channels to help direct debris to the outlet. A horizontal router table is the safest choice for mortise & tenons, vertical panel bits and more.
BrandWoodhaven #ad
ManufacturerWoodhaven #ad
Part Number6004

4. E-TING

#ad

E-TING 4Pcs Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B Quick Release Tool

#ad
E-TING #ad - Package included: 4 pcs e-tiNG GH-201B horizontal quick release toggle clamp. Retracted clamp will allow for vertical removal of clamped item, mechanism allows maximum clearance. Design: low height design. Holding capacity force: 198 lbs. Application: a rock-solid grip to install on jigs, tool fixtures, or movable bases. 145*35*40mm/ 5. 7" x 1. 38" x 1. 57" l*w*H. Material: cold-rolled carbon steel with Zinc plated coating for corrosion resistance; Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips. Size: approx.
BrandE-TING #ad
ManufacturerE-TING #ad
Height3.74 Inches
Length5.91 Inches
Weight1.15 Pounds
Width1.42 Inches
Part Number4xSKU10645#4-US
Model4xSKU10645#4

5. MICROJIG

#ad

GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws

#ad
MICROJIG #ad - 90-degree flipguide for vertical footing on bandsaws and router tables. A true microjIG Innovation. Proprietary green GRR-RIP for extreme hold. Optional mounts for Deflector/Connector shield plate for additional protection against chip debris.

Ergonomic handle exerts directional pressure against the fence. Ergonomic handle exerts directional pressure against the fence. Proprietary green GRR-RIP for extreme hold. Auto-retracting heel technology hooks the tail-end of your board. Auto-retracting heel technology hooks the tail-end of your board. Optional mounts for Deflector/Connector shield plate for additional protection against chip debris. Made in the usa. 90-degree flip guide for vertical footing on band saws and router tables.
BrandMICROJIG #ad
ManufacturerMICROJIG, Inc. #ad
Height3.5 Inches
Length9 Inches
Weight0.14 Pounds
Width3.5 Inches
Part NumberGB-1
ModelGB-1
WarrantyExtended 3-Year Manufacturer's Warranty from Authorized Dealers Only

6. RELIANCER

#ad

Digital Height and Depth Guage Magnetic Horizontal Vertical Measuring Tool w/Detachable Plunger Measures from 0 to 3 1/8" for hand routers/router tables/table saws Woodworking/Construction/Machining

#ad
RELIANCER #ad - Made of engineering plasticthe material is made of engineering plastics, it has excellent heat and cold resistance, and is suitable for use as structural materials; it has good corrosion resistance, excellent mechanical properties in a wide range of temperature range, Compared with general plastics, little environmental impact, and good durability.

Easy to usemeasure compartment’s height with magnets on bottom, it can easily adhere to a iron surface. Short press ON/OFF to set zero. Put on a saw blade and measure its height. Check the lcd and adjust the saw to required value. Measure compartment’s depth. Load the depth pin. Set zero on a level and measure compartment’s depth.

As mentioned above, the operation is very easy and measurement can be carried out through the button. Human designself-standing with 10mm diameter magnets on feet can be attached to an iron object for secure measurements and avoid shaking. Plunger attachment can attaches to measure bore, dado and slot depth. Beautiful shape and artful design, very light, easy to take with. Have 1*cr2032 battery is included.
BrandRELIANCER #ad
ManufacturerReliancer #ad

7. SawStop

#ad

SawStop RT-HFD Double Horizontal Feather Board For RT

#ad
SawStop #ad - Holds your workpiece safely against the Router fence for added stability. Stackable featherboards for extra support for taller stock. T-slot dimensions: 9/16"W x 3/16"d. Easy-grip lock knobs compatible with all SawStop Router tables and fences.
BrandSawStop #ad
ManufacturerSawStop #ad
Height2.5 Inches
Length6.75 Inches
Weight1.8 Pounds
Width7.5 Inches
Part NumberRT-HFD
ModelRT-HFD

8. WOODRIVER

#ad

WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop

#ad
WOODRIVER #ad - Flip-stop adjusts along the fence for repeatable accuracy - Improve safety and accuracy on the table saw and the router table. Woodriver is proudly made by woodcraft, videos, wood, dust collection and more.

17-1/2"-long anodized aluminum fence rail adjusts along miter gauge head. Our award winning family of brands includes woodriver, wood stain and paint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, sanding, hand tools, America’s leading supplier of saws, kits, routers, planes, power tools, Highpoint, and plans. Adjustable miter bar fits snug inside standard 3/4" x 3/8" miter slots. Positive stops at 0°, 30°, 60°, 45°, 22.5°, 67. 5° and 90° in both directions.
BrandWOODRIVER #ad
ManufacturerWoodcraft Supply #ad
Height2.9 Inches
Length19.2 Inches
Weight5.07 Pounds
Width5.8 Inches
Part NumberMG-450

9. BOSCH

#ad

Bosch Under-Table Router Base with Above-Table Hex Key RA1165

#ad
BOSCH #ad - The router base is designed for use with 1617, 1617EVS, 1617EVSPK, 1618, 1618EVS routers. New and improved: the bosch ra1165 under-table router Base is the new base for the 1617/1618 series routers, replacing the RA1164.

Mountable: the ra1165 base has threaded holes positioned in Bosch’s 4-hole subbase pattern and common 3-holes subbase pattern for mounting. Convenient: the wide 3-3/4 base opening allows for the use of larger bits while the quick clamp system allows the motor to be moved with ease for tool-free base changes. Adustable: the ra1165 conveniently allows depth adjustment of bit height from above the table.
BrandBOSCH #ad
ManufacturerBosch #ad
Height0 Inches
Length0 Inches
Weight1.5 Pounds
Width0 Inches
Part NumberRA1165
ModelRA1165

10. Fulton

#ad

Fulton Dual Deluxe Stackable Featherboards with Riser Blocks Aluminum Miter Lock Bar and T Bolt Hardware for Track or Miter Slot Mounting Ideal for Table Saws Router Tables and Band Saws

#ad
Fulton #ad - The fulton dual deluxe stacked featherboard can be used as one unit or can be separated and used for vertical and horizontal applications. This means that when the knob is secured and the bolt is properly seated, the bar spreads out much better than before and creates a nice tight fit into your miter track.

Each featherboard measures approximately 7¾” tall by 7-1/8” wide which is ideal for most workshop fences and table saw tops. We identified this issue and have redesigned the miter bar making it far more secure and easier to lock into your miter track. This means you can use the featherboard vertically on a router table fence or horizontally laying flat on a router table or table saw top surface. Many featherboards come with a miter bar locking system that typically do not fit very well. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence.

Most work shops have more than one handy at any given time. This dual featherboard also includes 1½” long ¼” x 20tpi t-bolts. What is a featherboard you might ask? is it something i need for my workshop? well the short answer is yes. The featherboard must be completely inside the track or slot in order for it to properly work. The dual featherboard comes with all the necessary hardware to get going right out of the box.
BrandFulton #ad
ManufacturerPeachtree Woodworking Supply Inc. #ad