Top 10 Gx24q-3 Adapter – Light Sockets

As an Amazon Associate I earn from qualifying purchases.

1. Bonlux

#ad

Rewire/Remove/Bypass the Ballast is Required, Bonlux 6-pack Gx24q to E26/E27 Socket Adapter, Gx24 Short 4 Pin to Medium Edison Lamp Base Converter

#ad
Bonlux #ad - Save you a lot of troubles and money to replace your original Halogen CFL lighting fixtures. Please consult an electrician if you are unsure. Doing so will likely cause the bulb flickering and EVEN SMOKING!! This lamp base converter doesn't change any voltage or current.

Do not operate the led bulb with a ballast in the fixture. Note: it is 100% that PL-C downlight fixture has ballast inside. Even you are replacing with e26/e27 cfl, please dismantle the ballast before install the LED light, the CFL E26/e27 Lamp will be flickering or not even turn on! Attention buyers: rewiring & removing/bypassing the ballast at the light fixture is required for these adapters to function properly. It has the short version 4-pins and is suitable and compatible with 4 pin g24q-1, G24Q-3, GX24Q-1, GX24Q-2, G24Q-2, GX24Q-3 Please confirm what base you need before you buy.

Easily transfer your gx24 fixture to fit any of the E26/E27 standard medium base light bulbs. If there is a ballast connected at your fixture, you need to remove the ballast! Otherwise, otherwise the ballast will make resonance high voltage which can destroy the light. The base depth of this product is 15mm/059 inches.
BrandBonlux #ad
ManufacturerLusta LED Co., Ltd #ad
Height3.14 Inches
Length2.04 Inches
Weight5 ounces
Width3.14 Inches

2. Luxvista

#ad

G24Q to E26/E27 4 Pin CFL Lamp Base Converter, Gx24q to E26 Adapter, 10-Pack, Luxvista Gx24q to E26 Lamp Base Converter, Remove Bypass the Ballast

#ad
Luxvista #ad - Easy installation - twist into existing GX24Q socket and it immediately transforms your fixture to fit any standard E26/E27 medium screw base bulb.

Compatible base - suit for all cfl 4 pin gx24 base, g24q-2, compatible with 4 pin g24q-1, GX24Q-1, G24Q-3, gx24q-2, GX24Q-3 Please confirm what base you need before you buy. If you have not remove or bypass ballast, it will damage the bulb or cause filckering. High temperature resistant - Anti-burning PBT material and anti-aging enable more safty in your life. No ballast - ballast need to be removed or bypassed. Features - gx24q to medium edison e26/e27 adapter converter, 4 pin gx24 base, dimension: H 5. 6cm * w 8cm 2. 28 * 3. 14 inches.
BrandLuxvista #ad
ManufacturerLusta LED Co., Ltd #ad
Height3.14 Inches
Length2.28 Inches
Width2.28 Inches
Part Number818

3. E-Simpo

#ad

Must Bypass Ballast to Avoid Flick Smoke Burn 6pcs E-Simpo 4Pin Conductive Gx24q to E26/E27 Lamp Base Adapter Short G24q to Medium Edison Light Socket Converter Replace CFL PL GX24Q Holder

#ad
E-Simpo #ad - There are led bulbs with driver compatible with the ballast, so the professional doing is bypass it. All pin-based cfl is ballast-lamp separated, cause high temperature which will damage LED Bulb, which you may find work without bypass ballast.

Because led lamp are built with leds and driver which is transforming the 100-240v ac to DC for LEDs. Ballast is a must to start a high voltage600v-1500v 1ms to light up the CFL, so 600-1500V will be too high, and easily destroy the led lamp. But no led driver can be compatible with all ballast. Ballast is there consuming power, E26/E27 bulbs are self-ballast. All pin-based cfl, like gx24q g24 gx23 g23 are lamp-ballast separated, but it is dangerous for led lamp.

Consult an electrician if you are unsure. So the led driver input should be 100v-240v or 85-265V, but all screw-in E26 E27 are lamp-ballast integrated. The ballast in your fixture must be removed or bypassed for these adapters to function properly. This is 4p short 15. 5mm gx24q base, two red and two blue output side. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Part NumberGX24Q-E26
ModelGX24Q to E26/E27 Adapter

4. E-Simpo

#ad

Need Bypass BallastGX24Q-3 to E26/E27 CFL Bulb Socket Adapter 6pcs E-Simpo 4-Pin GX24Q G24Q to Standard Medium Bulb Holder Base Converter

#ad
E-Simpo #ad - Material: anti-burning pbt, copper contact. Need rewiring!!! not for diy, please install it only with qualified electrician!!! bypASS/ REMOVE the ballast, the ballast has a black and white wire on the input side, and connect 2 red to black, two red and two blue output side.

Short version 4-pins: q series has a shorter tip than d series, gx24q-2, g24q-2. G24q-3, gx24q-1, suitable for g24q-1, gx24q-3 socket;works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube;. Home or commercial use, Suitable for less than 100W. It is 100% that pl-c downlight fixture has ballast inside. 6pcs. Dismantle ballast before install the led light, reviews like burnt, hot, otherwise the ballast will make resonance high voltage which destroy the light, smell, flicking are all results that not bypass the ballast correctly.4

4pin gx24q or g24q to e26/e27 light socket adapter. Please make sure the lamp base type before you buy, DON'T Mix with other 2P 4P socket. No ballast is required. To bypass this ballast, cut all the Input and output wires, 2 Blue to White wire. With base depth 15.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
ModelGX24Q-E26

5. E-Simpo

#ad

Need Rewire to Bypass Ballast. 12-Pack, 12pcs E-Simpo 4Pin GX24Q to E26/E27 CFL Bulb Socket Lamp Base Lampholder Adapter Converter,Physically Change Contact

#ad
E-Simpo #ad - G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US. All pin-based cfl, like gx24q g24 gx23 g23 are lamp-ballast separated, but it is dangerous for led lamp. The ballast in your fixture must be removed or bypassed for these adapters to function properly.

There are some led driver who can be compatible with the ballast, no led driver can be compatible with all the ballast. Ballast is a must to start a high voltage600v-1500v 1ms to light up the CFL, so 600-1500V will be too high, and easily destroy the led lamp. Because led lamp are built with leds and driver which is transforming the 100-240v ac to DC for LEDs. So the best thing is bypass or remove once we want to change CFL to LED Lamp. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb.

So the led driver input should be 100v-240v or 85-265V, but all screw-in E26 E27 are lamp-ballast integrated. Consult an electrician if you are unsure. This is 4p, not for 2p;need bypass or remove the ballast, otherwise, it doesn't light on. When we remove pin-based cfl, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Part NumberGX24Q-E27
Warranty100% work perfectly! You need remove the ballast inside the front head fixture!

6. E-Simpo

#ad

Need Rewire to Bypass Ballast. 2-Pack, 2pcs E-Simpo 4Pin Gx24q to E26/E27 Light Socket Adapter Lamp Base Converter. NOT PLUG AND PLAY

#ad
E-Simpo #ad - Do not operate the led bulb with ballast in the fiXTURE. Need ballast removal. But mostly gx24q cfls are with an electronic ballast inside, and damage the electrical parts inside the bulb. Pbt housing, copper contact. Suitable for all voltage: 100-240v, works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube.

Doing so will likely damage the bulb. Physically change the socket contact, which will cause the led bulb flickering, burnt, hot or smell, twist into existing GX24Q socket and transform the fixture to fit any standard E26 E27 medium size bulb. When we remove pin-based cfl, there will be 2 ballasts, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, the light will not work.

There are some led driver who can be compatible with the ballast, no led driver can be compatible with all the ballast. 2pcs/lot, gx24q-1, gx24q-2, suitable for g24q-1, g24q-2. G24q-3, sample pack. 4p conductive, e-simpo's new generation. Short version 4pins, GX24q-3 socket;. With base depth is 15.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Weight66 Grams

7. E-Simpo

#ad

15.5mm 4pin,Need Bypass The Inside Ballast!, 60-Pack GX24q to E26 Lamp Base Converter,GX24q-3 Adapter,G24 to E26 Adapter

#ad
E-Simpo #ad - This is 4p, otherwise, not for 2p;need bypass or remove the ballast, it doesn't light on. Ballast is a must to start a high voltage600v-1500v 1ms to light up the cfl, like gx24q G24 GX23 G23 are lamp-ballast separated, but it is dangerous for LED Lamp. G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US.

Consult an electrician if you are unsure. There are some led driver who can be compatible with the ballast, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, no LED Driver can be compatible with all the ballast. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. The ballast in your fixture must be removed or bypassed for these adapters to function properly.

So the best thing is bypass or remove once we want to change CFL to LED Lamp. All pin-based cfl, so 600-1500v will be too high, but all screw-in e26 e27 are lamp-ballast integrated. When we remove pin-based CFL, there will be 2 ballasts, the light will not work. Because led lamp are built with leds and driver which is transforming the 100-240V AC to DC for LEDs. So the led driver input should be 100V-240V or 85-265V, and easily destroy the led lamp.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Height2.3 Inches
Length1.5 Inches
Weight0.05 Pounds
Width1.5 Inches
Part NumberGX24Q-E26

8. E-Simpo

#ad

4pcs E-Simpo 4-Pin GX24Q to E26/E27 Light Socket Adapter Need Bypass Ballast CFL G24Q 4P Lamp Base to Standard LED E26 e27 Lamp Base Holder Converter PBT Housing Rohs

#ad
E-Simpo #ad - Consult an electrician if you are unsure. All pin-based cfl, but it is dangerous for led lamp. 4pcs. 4pin gx24q, not for 2p; need bypass or remove the ballast, all phenom like smell smoke flicker burnt are caused by ballast which is not required for LED Lamps.

So the led driver input should be 100v-240v or 85-265v, like g24d gx24d gx24q gx23 g23 are lamp-ballast separated, so 600-1500V will be too high, but all screw-in E26 E27 are lamp-ballast integrated. Ballast is a must to start a high voltage600V-1500V 1ms to light up the CFL, and easily destroy the led lamp. Works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;g24q-2 base:18w quad tube;gx24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube.

Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. Because led lamp are built with leds and driver which is transforming the 100-240v ac to dc for leds. The ballast in your fixture must be removed or bypassed for these adapters to function properly. G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Part NumberGX24Q-E26
ModelGX24Q-E26

9. AC

#ad

G24 to E26 E27 Lamp Base Converter, Bulb Base Adapter, LED Light Sockets Adapter, 4-Pin Light Bulb Socket, Lamp Holder Converters with Short Shaft Pack of 10

#ad
AC #ad - There are some led driver who can be compatible with the ballast, the ballast is still working in front fixture; even we change to E26/E27 CFL, we only removed the lamp, no LED Driver can be compatible with all the ballast. It fits any standard medium bulb to the G24 and enables almost all commonly found bulbs to work with the output.

The ballast in your fixture must be removed or bypassed for these adapterS TO FUNCTION PROPERLY. Material: flame resistant pbt. So the best thing is bypass or remove once we want to change CFL to LED Lamp. G24 base to e26/e27 light sockets adapter converter can be used to transforms G24 fixture to fit standard the E26 / E27 medium size bulb in any. Please check your bulb size, and refer on our adapter detailed size on the left picture before you purchase.

Please bypass or remove the ballast when you use, otherwise the bulb doesn't light on. Suitable for multiple voltagesNote: it can not transfer the voltage, just the socket converter. Ideal for home use. This adapter with SHORT shaft. Easy to install, plug and play. When we remove pin-based CFL, there will be 2 ballasts, the light will not work.
BrandAC #ad
ManufacturerAC #ad

10. PHITUODA

#ad

4 Pin Bulb Base Converter LED Accessories, Gx24q to E27 Lamp Base Holder, NOT PLUG AND PLAY, Rewire/Remove/Bypass the Ballast is Required, PHITUODA 4pcs Gx24q to E26/E27 Socket Adapter

#ad
PHITUODA #ad - We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale! If you are not sure, please consult an electrician. Widely application: our socket converter is suitable for home lighting, photography lighting, restaurant lighting, office lighting, and other suitable places.

They are practical and convenient for your life that is an ideal household tool. Hassle-free guarantee: phituoda's products can only be packed and shipped after strict quality inspection. Premium material: lamp base converter made of flame retardant PBT material and copper nickel-plated pins, more durable and practical, Small size and lightweight. Do not use ballasts to operate LED bulbs in lamps. Works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube; g24q-2 base:18w quad Tube; GX24q-2 Base:18w Triple Tube; G24q-3 Base:26w 32w Quad Tube; GX24q-3 Base:26w 32w Triple Tube.

If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. Doing so may cause the bulb to flicker or even smoke! Check the size first: 4 x led light socket adapter. Warmly notes: in order for these adapters to work properly, the ballast in the luminaire must be removed or bypassed.
BrandPHITUODA #ad
ManufacturerPHITUODA #ad
Part NumberTR20210515 - 003