1. Milescraft
#ad
Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences
#adMilescraft #ad - All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences. Ergonomic knobs help prevent over-tightening and provides non-slip loosening.All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences. Dual slide motion-side to side and forward action for quick and easy setup.
More information #ad
Dual slide motion-side to side and forward action for quick and easy setup. Unique pre-load tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back. Pre-load tension design maintains consistent pressure across face of the feather board. Ergonomic knobs help prevent over-tightening and provides non-slip loosening. 5/8" and 3/4" metal miter bars fit all standard miter slots. This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction. Split rail miter bar construction-provides maximum hold. Split rail miter bar construction-provides maximum hold.
Brand | Milescraft #ad |
Manufacturer | Milescraft Inc. #ad |
Height | 2.85 Inches |
Length | 8.9 Inches |
Weight | 0.8 Pounds |
Width | 10.5 Inches |
Part Number | 1406 |
Model | 1406 |
Warranty | Limited |
More information #ad
2. MICRO JIG
#ad
And Jointers by MICROJIG, Router Tables, GRR-RIPPER 3D Pushblock for Table Saws, Band Saws
#adMICRO JIG #ad - Work with small stock safely on the table saw, Jointer, Router table, & Band saw. Powerful high-friction durable grip for extreme hold. Work with small stock safely. Precision cutting and control down to 1/4" Ripping.More information #ad
3-directional Force for total control of the workpiece. Precise 1/4" thin rips. Extended 3-year. Moving-blade-Guard Hand protection. A true micrOJIG Innovation. Made in usa. Protect hands and prevent kickback like never before. Virtually eliminates kickback. 100% satisfaction. Fully adjustable for easy handling.Brand | MICRO JIG #ad |
Manufacturer | MICROJIG, Inc. #ad |
Height | 4.5 Inches |
Length | 7 Inches |
Weight | 1.8 Pounds |
Width | 4.5 Inches |
Part Number | GR-100 |
Model | GR-100 |
Warranty | Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only |
More information #ad
3. MICRO JIG
#ad
Jointer, Router Table, GRR-RIPPER Advanced 3D Pushblock for Table Saw, and Band Saw by MICROJIG
#adMICRO JIG #ad - Moving-blade-guard hand protection. Cutting range table Saws:1/4 to 5 inch. Made in the usa. Precise 1/4" thin rips. A true microJIG Innovation.More information #ad
:. Gr-200 features include: 3-directional Force for total control of the workpiece and virtually eliminate kickback. Stabilizes for cutting bevel rips, irregular-shaped stock, dowels, resawing, dados and more.Brand | MICRO JIG #ad |
Manufacturer | MICROJIG, Inc. #ad |
Height | 4.65 Inches |
Length | 8 Inches |
Weight | 2.65 Pounds |
Width | 5.5 Inches |
Part Number | GR-200 |
Model | GR-200 |
Warranty | Extended 3-Year Warranty from Authorized Resellers |
More information #ad
4. MICROJIG
#ad
GRR-RIPPER 1/8" Leg Table Saw Accessory by MICROJIG
#adMICROJIG #ad - Easily cleans with denatured or rubbing alcohol. Grr-ripper accessory for ripping 1/8" thin rips consistently and cleanly on a table saw. A true microjIG Innovation. Attaches directly to the main body of the GRR-RIPPER or directly to the Side Leg of the GRR-RIPPER.More information #ad
Use for Wood Veneer. Keep clean with alcohol denatured. Perfect for edge bending, veneer, decorative design, inlays, model building and more. Made in the usa. Powerful green grr-RIP holds and feeds wood through the cut.Brand | MICROJIG #ad |
Manufacturer | MICROJIG, Inc. #ad |
Height | 2 Inches |
Length | 7 Inches |
Weight | 0.13 Pounds |
Width | 0.25 Inches |
Part Number | GRP-11G |
Model | GRP-11G |
Warranty | Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only |
More information #ad
5. DEWALT
#ad
Band Saws, DEWALT Table Saw for Jobsite, and Jointers by MICROJIG, Compact, Router Tables, 8-1/4-Inch DWE7485 & GRR-RIPPER 3D Pushblock for Table Saws
#adDEWALT #ad - Product 2: powerful high-friction durable grip for extreme hold. Product 1: variety of cuts: 24. 5 inches of rip capacity for ripping 4x8 plywood or OSB sheets. Product 1: easy adjustments: Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate.More information #ad
Product 2: Fully adjustable for easy handling. Product 1: portability: Compact size for ease of transportation and storage. Product 1: power: 15 Amp, 5800 rpm motor. Product 2: protect hands and prevent kickback like never before. Product 2: precision cutting and control down to 1/4" Ripping.Brand | DEWALT #ad |
More information #ad
6. MICROJIG
#ad
2 Pack, Jointer, GRR-RIPPER Advanced 3D Pushblock for Table Saw, Router Table, and Band Saw by MICROJIG
#adMICROJIG #ad - Precision woodworking hand pushing tool with adjustable/detachable components. Stabilizes work piece as the saw blade passes through either right or left tunnel.More information #ad
The handle, center leg & balance support are all fully adjustable. Utilizes multiple grooved non-slip pads for strong gripping & holding power. Pushes & holds both sides of the work piece as it is being cut.Brand | MICROJIG #ad |
Manufacturer | MicroJig #ad |
Height | 9.1 Inches |
Length | 9.1 Inches |
Width | 9.1 Inches |
Part Number | GR-200X2 |
More information #ad
7. MICROJIG
#ad
And Band Saws, Jointer, GRR-RIP BLOCK Smart Hook Pushblock for Router Table
#adMICROJIG #ad - Optional mounts for Deflector/Connector shield plate for additional protection against chip debris. Ergonomic handle exerts directional pressure against the fence.90-degree flipguide for vertical footing on bandsaws and router tables. 90-degree flip guide for vertical footing on band saws and router tables. A true microjIG Innovation. Ergonomic handle exerts directional pressure against the fence.
More information #ad
Proprietary green GRR-RIP for extreme hold. Auto-retracting heel technology hooks the tail-end of your board. Made in the usa. Proprietary green GRR-RIP for extreme hold. Optional mounts for Deflector/Connector shield plate for additional protection against chip debris. Auto-retracting heel technology hooks the tail-end of your board.Brand | MICROJIG #ad |
Manufacturer | MICROJIG, Inc. #ad |
Height | 3.5 Inches |
Length | 9 Inches |
Weight | 0.14 Pounds |
Width | 3.5 Inches |
Part Number | GB-1 |
Model | GB-1 |
Warranty | Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only |
More information #ad
8. MICROJIG
#ad
And Jointers by MICROJIG, GRR-RIPPER 3D Pushblock 2-Pack for Table Saws, Router Tables, Band Saws
#adMICROJIG #ad - Precision, control and safety has never been so smart. Virtually eliminates kickback on table saws the grr-ripper’s unique design provides downward force, controlling the keeper and off cut workpiece.Combo pack includes two 2 grr-ripper gr-100s: handle, Main Body, 3 legs with green grr-RIP, Balance Support, Hardware. Grr-riper 3d pushblock features include: 3-directional Force to eliminate kickback and give you superior precision, control and safety over the workpiece.
More information #ad
This prevents the workpiece from lifting up off the table top – virtually eliminating kickback. Unbelievable gripping power green-grip is the proprietary non-slip material that gives you superior gripping power over materials such as oak, walnut, cherry, various plastics and aluminum. The grr-ripper acts as a Moving-Blade-Guard for total hand protection.Brand | MICROJIG #ad |
Manufacturer | MicroJig #ad |
Height | 6.7 Inches |
Length | 10.3 Inches |
Weight | 4.25 Pounds |
Width | 8.4 Inches |
Part Number | GR-100X2 |
Model | BK-MICJI-2C |
More information #ad
9. MICRO JIG
#ad
2 pack, GripperTM Deluxe Package
#adMICRO JIG #ad - Includes; 2 gr-100 GRR-Rippers. The handle, center leg & balance support are all fully adjustable. Pushes & holds the work piece as the saw blade passes through either right or left tunnel.More information #ad
Precision woodworking hand pushing tool with adjustable/detachable components. Utilizes multiple grooved non-slip pads for strong gripping & holding power.Brand | MICRO JIG #ad |
Manufacturer | MicroJig #ad |
Height | 10.7 Inches |
Length | 7.4 Inches |
Width | 5.2 Inches |
Part Number | GR-100BY |
More information #ad
10. MICROJIG
#ad
And Band Saw + GRR-RIPPER Gravity Heel Kit, Router Table, Jointer, GRR-RIPPER Advanced 3D Pushblock for Table Saw
#adMICROJIG #ad - Includes grr-ripper gr-200 advanced 3d pushblock for table saw + a Gravity Heel Kit - Made in the USA. Gr-200 - features include: 3-Directional Force for total control of the workpiece and virtually eliminate kickback.More information #ad
A true microjIG Innovation. Moving-blade-guard Hand protection, Precise 1/4" thin rips. Stabilizes for cutting bevel rips, dowels, resawing, irregular-shaped stock, dados and more. Gravity heel accessory is a fully adjustable heel with auto-retracting technology for reducing blowout.Brand | MICROJIG #ad |
Manufacturer | MICROJIG, Inc. #ad |
More information #ad