Top 10 Center Punch Kit – Hole Punches

As an Amazon Associate I earn from qualifying purchases.

1. Neiko

#ad

3/32", 1/2", 28 Piece, Heat Treated Alloy Steel, Neiko 02621A Transfer Punch Set

#ad
Neiko #ad - Drilling punch set includes easy-to-see index stand to keep tools stacked and ready to pull. Precision point transfer punches, suitable for toolmakers and machinists. Wide set of transfer punches from 3/32" to 1/2" by 1/64"; includes 17/32" transfer punch. Takes the guesswork out of transferring threaded, drilled or reamed machining, drilling operations. Each punch is made high quality heat-treated alloy steel with black oxide finish for durability and rust resistance.
BrandNeiko #ad
ManufacturerRidgerock Tools Inc. #ad
Height2.76 Inches
Length5.71 Inches
Width2.95 Inches
Part Number02621A
Model02621A

2. HHIP

#ad

1/2", HHIP 8600-0041 28 Piece Transfer Punch Set, 3/32"

#ad
HHIP #ad - 0025". 4-7/8" long. Undersize. Used for transferring of threaded, drilled and tapped holes. Heat treated tempered tool steel for longer life. 3/32-1/2" by 64ths and 11/32". Black oxide finish.
BrandHHIP #ad
ManufacturerHHIP #ad
Height4 Inches
Length8 Inches
Weight3.57 Pounds
Width4 Inches
Part Number8600-0041
Model8600-0041

3. Starrett

#ad

Starrett S117PC Set of 5 Center Punches, 5/32" Diameters, in Plastic Case, 5/64”, 1/16", 3/32”, 1/8”

#ad
Starrett #ad - Knurled grips: round shank is knurled for a sturdy grip and greater control; As an added precaution, always wear safety goggles when using striking tools. Steel construction: these center punches are made of hardened steel; Its tempered head makes it less likely to fracture from a hard, off-center blow.

Carry pouch included: this center pouch set comes with a convenient, red plastic, storage pouch case for keeping your center punches organized. Pre-drilling tool: center punches are tools used for making an indentation in an object; This allows you to safely drill a hole at the same spot without slipping. Set of 5 - includes a combo of our individual models, 117a 5/64" d tapered point & 3" l, including 117aa with 1/16" d tapered point & 4" l, 117C with 1/8" D tapered point & 4" L, 117d w/ 5/32" D tapered point & 4" L, 117b with 3/32" d tapered point & 4" L.
BrandStarrett #ad
ManufacturerSTAKF #ad
Height8.2 Inches
Length1 Inches
Weight0.4 Pounds
Width3.1 Inches
Part NumberS117PC
ModelS117PC
WarrantyOne Year on defects in material and workmanship

4. Mayhew Tools

#ad

Black, Mayhew Select 89082 Punch Set, 3-Piece

#ad
Mayhew Tools #ad - 74001 5/16-inch reg ec Center Punch. 2-year Limited. Includes: 24008 7/16-inch center Punch 1/4-Inch Pt. 43502 7/32-inch by 5-inch Prick Punch.
BrandMayhew Tools #ad
ManufacturerMayhew #ad
Height2 Inches
Length12 Inches
Weight0.48 Pounds
Width4 Inches
Part Number89082
Model39082HT
Warranty2-Year Limited Warranty

5. UI PRO TOOLS

#ad

28pc Center Transfer Punches Set Machinists Tool Punch Stand Heat Treated Steel Black Industrial Oxide Finish

#ad
UI PRO TOOLS #ad - Made of finest heat treated tempered tool steel, black industrial oxide finish,. Punches holder Plastic or Metal may very, randomly pick up. Diameters 00025” undersized to facilitate USE. Indexed stand3/32" to 1/2" punches by 64ths, plus Handy 17/32" punch. Eliminates the guesswork when transferring threaded, drilled, or reamed holes.
BrandUI PRO TOOLS #ad
ManufacturerCHINA #ad
Height3 Inches
Length6 Inches
Weight3.5 Pounds
Width5 Inches
Part NumberCMT42-40219

6. Stalwart

#ad

16 Pieces- Includes Taper Punches, Pin Punches, and Storage Case- By Stalwart, Punch And Chisel Set, Center Punches, Chisel Gauge, Cold Chisels

#ad
Stalwart #ad - Multiuse tool set- the 16 piece punch and chisel is a must have for artists, woodworkers, and home DIYers. Ideal for working with wood, metal, metal workers, sculpture, moldings, carving detail into cabinets, carpenters, cars, dressers, automotive work, wood furniture and more!.

Durable-  stalwart’s chisels and punch tools are made from heat treated chrome vanadium steel construction with 54~58 HRC hardness. The carry case also makes for easy transport and storage of the tools. Satisfaction guaranteed – stalwart is committed to providing consumers with the absolute best price and value on our entire line of products. 2 center punches;1/8”x5”, 5/8”x 6 ½”. Easy to store and carry- the cloth roll up carry and storage pouch will keep your chisel and punch set safe, secure, and organized until your next use.

Note: this is an exclusive product of stalwart and ONLY Chisel and Punch Sets by Stalwart are GUARANTEED to be genuine. 5 pin punches; 3/32”x 4 ¼”, 5/32”x 5”, 3/16”x 5 ¼”, 1/2”x 6”, 1/8”x 5 ¾”, 5/32”x6”, 1/8”x 4 ¾”, 3/16”x 6” and 1 chisel gauge.3 cold chisels:3/8”x 5 ½”, 3/16”x 6 ¼”, ¼”x 5 ¾”. Hardness 54~58 HRC. The chisel set can be used multiple times without worry of dulling or wear from use. Set includes-  the 16-piece set consists of 5 taper punches; 3/32”x5 1/4”, 1/4”x 6 ¾”.
BrandStalwart #ad
ManufacturerTRAUV #ad
Height0.13 Inches
Length11.25 Inches
Weight2.5 Pounds
Width9.5 Inches
Part Number75-HT4072
Model75-HT4072

7. Mayhew Tools

#ad

7-Piece, Mayhew 60007 Center Punch Kit

#ad
Mayhew Tools #ad - 24007 5/16-inch black oxide Center Punch 1/8 Pt. 24002 3/8-inch black oxide center punch, 24005 1/4-Inch Black Oxide Center Punch 1/16 Pt. 24008 7/16-inch black oxide Center Punch 1/4 Pt. Includes: 24000 1/4-inch black oxide center punch, 24001 5/16-Inch Black Oxide Center Punch. 24006 1/4-inch black oxide Center Punch 5/64 Pt.
BrandMayhew Tools #ad
ManufacturerMayhew #ad
Height1 Inches
Length6.24 Inches
Weight1.03 Pounds
Width5 Inches
Part Number60007
Model60007
WarrantyUnlimited Lifetime Warranty

8. Mudder

#ad

Metal, Plastic with Cushion Cap and Adjustable Impact, 4 Pieces Automatic Center Punch 5 Inch Center Hole Punch Adjustable Spring Loaded Metal Drill Tool for Wood

#ad
Mudder #ad - Sturdy material: the automatic center punch is made of solid and durable brass, come with deep knurling on the surface, which helps offer more accurate handling and control by one hand. Package includes: you will receive 4 pieces automatic center punches in the package with 2 different colors, each color has 2 pieces, as picture shown, you can use or replace them for a long time.

Using steps: mark the center of the hole you want to make, and press the handle firmly, after the punch is pressed back into the rod for a short time, the strong spring will pop up the punch strongly, it will leave a mark of the hole on the item. Repeatable impact: 5 inch spring loaded automatic center hole punch can mark a dimpled starting point, can be increased or decreased striking force, the red adjustable impact cap is made of ABS plastic, the good spring can support repeatable impact.

Broad use: automatic center hole punch is suitable for a variety of tasks, glass, metal, punching, pricking and scribing on wood, plastic, ideal use for marking, leather or wall surface and so on.
BrandMudder #ad
ManufacturerMudder #ad

9. HORUSDY

#ad

HORUSDY 28-Piece Transfer Punch Set, 3/32", 1/2", Heat Treated Alloy Steel Forging

#ad
HORUSDY #ad - Wide set of transfer punches from 3/32" to 1/2" by 1/64"; includes 17/32" transfer punch. Each punch is a high quality heat treated alloy steel with durability and rust resistance of a black oxide film. Drilling punch set includes easy-to-see index stand to keep tools stacked and ready to pull. Takes the guesswork out of transferring threaded, drilled or reamed machining, drilling operations. Precision indexing punch for tool builders and mechanics.
BrandHORUSDY #ad
ManufacturerHORUSDY #ad
Height3 Inches
Length6 Inches
Width3 Inches
Part Number97754

10. HORUSDY

#ad

HORUSDY 4-Piece Nail Setter Punch and Center Punch Set

#ad
HORUSDY #ad - The center punch is used to mark the center of the point and is typically used to mark the center of the hole when drilling. Nail is a great tool for embedding nails into wood veneers. Kit includes: 1/32" nail kit, 3/32" nail kit, 1/16" nail kit, 1/8" Center Punch. The punch is used to drive an object, such as a nail, or to form a sharp impression on the workpiece. Set the nail head under the wooden surface to obtain a smooth finished appearance. Improve the shaft's better grip.
BrandHORUSDY #ad
ManufacturerHORUSDY #ad
Height0.5 Inches
Length6.7 Inches
Width3.6 Inches
Part Number97385
Model.