Top 10 22mm Drill Bit – Drill Bits

As an Amazon Associate I earn from qualifying purchases.

1. uxcell


Uxcell Reduced Shank Drill Bit 22mm High Speed Steel HSS 9341 Black Oxide with 1/2 Inch Straight Shank

uxcell #ad - Common flute and overall length for minimal adjustment during tool changes. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.

Please note: to make clean and precise holes, water is required for lubrication and cooling when drilling metals. Wide application - design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance. Increased use of water lubrication will extend drill bit life. Reduced shank - expanding the size range capacity of a portable drill chuck. Black oxide finish - black oxide treatment adds lubricity. High speed steel tool - 22mm cutting diameter.
Branduxcell #ad
Manufactureruxcell #ad
Height1.57 Inches
Length5.51 Inches
Width3.94 Inches
Part Numbera18101200ux0129

2. uxcell


Uxcell Reduced Shank Twist Drill Bits 22mm High Speed Steel 4341 with 1/2 Inch Shank 1 Pcs

uxcell #ad - Features: cutting edge diameter : 22mm / 2. 17"; total length : 150mm / 1/2"; cutting Edge Length: 55mm / 087"; shank diameter : 12. 7mm / 6. 0". Common flute and overall length for minimal adjustment during tool changes.

Reduced shank: reduced shank drill expands the size range capacity of a portable drill chuck. High speed steel tool: high-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Versatile uses: for use in a wide range of stainless steel, aluminum alloy, copper, iron, brass and metal materials. Black & gold oxide finish: premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera19102500ux0075

3. Drill America


DWDRSD Series, Drill America-DWDRSD22.0MM 22.00mm Reduced Shank High Speed Steel Drill Bit with 1/2" Shank

Drill America #ad - Ideal for drilling in low and medium tensile strength materials. Round shanks allow use with a wide variety of toolholding systems. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. When run in a counterclockwise direction right-hand cut spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
BrandDrill America #ad
ManufacturerDrill America #ad
Height1.2 Inches
Length6 Inches
Weight0.52 Pounds
Width1.2 Inches
Part NumberDWDRSD22.0MM

4. uxcell


Woodworking Hinge Hole Drilling Boring Bit Cutter Blue, Tungsten Carbide Wood Hole Saw Auger Opener, Gray, uxcell Forstner Drill Bits 22mm

uxcell #ad - Applications: can be used for drilling holes on wood and plastic products, furniture, solid wood boards, MDF, door hinge. Arc curve design head for easy chip-removal, more efficient perforation. Forstner drill bit is for ordinary purpose. Used on cutting wood, plywood, plastics, fiberglass etc.

How to use: suitable for bench drill, cnc carving machine. To avoid causing damage, be sure no nails or other metal objects in wood before drilling. Processing hardwood or other hard materials should be injected with water to improve the quality and accuracy of drilling, vertical drilling machine, and extend the life of the hole opener. Used on desktop fixed equipment, and can not be used on handheld power tools such as hand drill or electric drill.

Can not drill metal and non-ferrous metal. Specifications: drilling dia. 22mm; shank size: 7mm; drilling depth: 48mm; total length: 79mm. The cutting edge and tip of the opener should be sharpened in time. Features: tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Tips: maximum speed: 2000rpm. Round shank, cemented carbide cutter and solid hardened steel body.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera18061100ux0493

5. Hilitand


High Speed Steel HSS Cone Drill Bit 1/4" Hex Shank Titanium Coated Hole Cutter 4-22mm, Step Drill Bit

Hilitand #ad - High speed steelthe step drill bit is made from high speed steel which has high hardness and good wear resistance. Wide applicationstep drill is most commonly used on softer materials such as thin iron sheet, PVC and wood board of 5mm or thinner.

Great for use in work where thin steel, aluminum, aluminum or plastic boxes and chassis are encountered. Wide size rangethis step drill bit can be used for drilling a wide range of hole sizes from 4mm to 22mm, can be widely applied. Size clearly markedthe hole size are clearly marked on the surface, you can check the data easily. Titanium coated the surface is coated with titanium which has better anti-rust performance and will not fade easily.
BrandHilitand #ad
ManufacturerHilitand #ad
Height0 Inches
Length0 Inches
Width0 Inches
Part NumberHilitandbfva8um9oc



LDEXIN 22mm/0.86" Diameter High Speed Steel 1/2" Round Shank Split Point Tip HSS Twist Flute Spiral Flute Drill Bit Metalworking Drills Black Oxide Finish

LDEXIN #ad - Application: for use in steel, pvc, acrylic, polycarbonate, maple, oak, ABS, MDF, brass, pine, copper, aluminum, nylon and composite materials. Durable and excellent working: using high-quality high-speed steel and withstand heavy duty operation for a long tool life.

Double cut groove, sharp edge strength, strong cutting force, high cutting speed. Split point design: split point tip starts on contact to keep the bit from walking for fast accurate holes, for clean results. Surface black oxide finish: surface treated with abrasion-resistant black oxide, better for smoother drilling, adds lubricity, reduced heat and extended drill bit life. Spiral flute drill: speed helix design for three times faster drilling than standard bits, sharp and twisted flute will make the drilling be more easy and effortless.
BrandLDEXIN #ad
ManufacturerGuangzhoujiajimaoyiyouxiangongsi #ad



Carbide Forstner Bits Flat Wing Drilling Hole Hinge Woodworking Hole Drill Bit, WEAVERBIRD Forstner Drill Bit 22mm 1 Piece

WEAVERBIRD #ad - Durable and smoothcarbide cutting tips and heat resistant coating for long-lasting performance, sharp and durable, precision balanced for smooth operation. Wide applicationsperfect used for drilling holes in different types of wood, vertical drilling machine, mounting spherical door shoot tip etc.

Excellent workmanshipselection of high quality Carbide blade, hardened and tempered, carbon high speed steel construction. Also suitable for drill press, hand held electric drill, pistol drill, bench drill, such as drawer, stand motor-driven drilling machine etc. Make blade more sharp and durable. Curved head designsmall incision resistance, improve the opening speed;curve design is beneficial to chip removal. Drill bits size15mm, 32mm, 16mm, 22mm, 18mm, 50mm for your choice. Perforation is more efficient.
ManufacturerWEAVERBIRD #ad
Height0.98 Inches
Length3.54 Inches
Width0.98 Inches
Part NumberWVD-US-0029

8. Rannb


Rannb 55/64"/22mm Reduced Shank Drill Bit HSS Twist Drill Bit

Rannb #ad - Dimensioncutting dia: 55/64"/22mm; shank size: 12. 7mm/1/2" x 54mm/2-1/8"d x l; flute Length Approx. Materialthe twist drill Bit is made of high speed steel with high hardness and good toughness. Common flute and overall length for minimal adjustment during tool changes. Applicationuse on aluminum, iron, plastic, wood. Great for electric drill. 76mm /2. 99";total length : 153mm / 6. 0". Reduced shank expanding the size range capacity of a portable drill chuck. Package content1pcs x Twist Drill Bit + Plastic Box.
BrandRannb #ad
ManufacturerRannb #ad
Part Numberwby2202

9. CMT


CMT 537.220.31 Forstner Bit, 22mm 55/64-Inch Diameter, 8mm Shank

CMT #ad - 2 spurs, 2 precision ground cutting edges, long-lasting cutting performance. 3-35/64-inch overall Length, Right-Hand Rotation. For drilling partially overlapped flat bottom holes or niches used to fix supports. For drilling holes in any direction and making arched openings. Drill precise flat bottom holes with no chipping in any thickness of soft wood.
BrandCMT #ad
ManufacturerCMT #ad
Height0.88 Inches
Length3.54 Inches
Weight0.16 Pounds
Width0.88 Inches
Part Number537.220.31

10. NACX


22mm55/64-Inch Reduced Shank Drill Bit, 1/2” Shank High Speed Steel Twist Drill Bit HSS-9341 for Aluminum Plate Copper Wood Stainless Steel

NACX #ad - Precision ground with geometry of 118 degree split point for quick penetration and accurate start-up.  . Specific size: cutting bit diameter: 22mm55/64”; shank: 12. 7mm05”; length: 148mm5. 8”. High speed steel type: 9341 is designed to ensure sharp and fast execution in metal material for clean results.  . Surface treatment of nitriding makes it durable, withstand heavy duty operation for long service life.  . Suitable for drilling various materials such as die steel, channel steel, copper, ordinary steel, l-beam, aluminum, wood or 1-3mm stainless steel.
BrandNACX #ad
ManufacturerNACX #ad