Top 10 12888 Quartz DIY Wall Clock Movement Mechanism – Clock Movements

As an Amazon Associate I earn from qualifying purchases.

1. TIKROUND

#ad

12888 Quartz DIY Wall Clock Movement Mechanism Repair Parts Replacement Kit Sweep Silent Movement,13mm 1/2 Inch Maximum Dial Thickness, 23mm 29/32 Inch Total Shaft Length.Black Hand

#ad
TIKROUND #ad - Good for repairing, replacing or making a clock. Movement total shaft length: 23 mm 29/32 inch, thread length: 15 mm 19/32 inch. Clock movement suitable for 9 - 13 mm 23/64 - 1/2 inch thickness clock panel. Applicable to cross-stitch, three-dimensional embroidery, frameless draw clock, craft clock, etc. Instructions - Included along with the movements. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-041
Model8541847228

2. TIKROUND

#ad

Include Hands Quartz DIY 12888 Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement

#ad
TIKROUND #ad - Parameter: "i" shaft, thread length is 5 mm 13/64 inch, drive long clock hands 10 mm to 450 mm; Total shaft length is 18 mm 45/64 inch, suitable for 1-3 mm 3/64 - 7/64 inch thickness clock panel.

Package contents: 1 clock movement with 1 hook, 2 Minute hands and some mounting hardware, 2 Hour hands, coming with specially designed box and instructions. Long spindle quartz clock replacement movement parts with metal hook, Good for repairing, replacing or making a clock. Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them. Diy clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Height0.65 Inches
Length2.2 Inches
Weight0.02 Pounds
Width2.2 Inches
Part NumberTIKROUND-M-031
ModelTIKROUND-M-031

3. TIKROUND

#ad

Youngtown 12888 Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement Fit Dials up to 40 cm(15.7 Inches ) in Diameter.

#ad
TIKROUND #ad - Good diy clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself. 7 mm 03 inch. 172 mm 6.

8 inches; Total minute hand length: approx. Measurement: hand length: total hour hand length: approx. Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the shaft dimensions. Applicable to cross-stitch, craft clock, frameless draw clock, three-dimensional embroidery, etc. Instructions - Included along with the movements. Material to make a clock by yourself. 207 mm 8. 1 inches; Second caps: approx. Silent movement total shaft length is 16 mm 41/64 inch, thread length is 8 mm 5/16 inch, suitable for 2 - 6 mm 5/64 - 15/64 inch thickness clock panel.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-036
ModelTIKROUND-M-036

4. TIKROUND

#ad

12888 Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement with 4 Sets Hands Total Shaft Length 23/32 inch Gold Hands.

#ad
TIKROUND #ad - Long spindle quartz clock replacement movement parts with metal hook, Good for repairing, replacing or making a clock. Parameter: "i" shaft, drive long clock hands 10 mm to 450 mm; Total shaft length is 18.

5 mm 23/32 inch, thread length is 8 mm 5/16 inch. Diy clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames. Step high torque "i" shaft clock movement: suitable for 2 - 6 mm 5/64 - 15/64 inch thickness clock panel. Parameter: "i" shaft, drive long clock hands 10 mm to 450 mm; total shaft length is 18 mm 45/64 inch, thread length is 5 mm 13/64 inch, suitable for 1-3 mm 3/64 - 7/64 inch thickness clock panel.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberTIKROUND-M-127

5. TIKROUND

#ad

Quartz DIY Wall Clock Movement Mechanisms Battery Powered DIY Repair Parts Replacement with 260 mm/ 10.2 Inch Long Spade Hands,3/10 Inch Maximum Dial Thickness,29/32 Inch Total Shaft Length.

#ad
TIKROUND #ad - 260 mm 102 inch; Second caps is approx. Diy clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.

187 mm 7. 4 inch; Minute hand is approx. Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them. Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands 10 mm to 450 mm. Center of hole hand size: hour hand is approx. Movement size: total shaft length is 23 mm 29/32 inch, thread length is 12 mm 15/32 inch, suitable for 4 - 8 mm 5/ 32 - 5/16 inches thickness clock panel. 7 mm 028 inch.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Part NumberC-001
Modelc-001

6. HILLHOME

#ad

3/10 in Max Dial Thickness, High Torque I Shaft Hands Quartz DIY Wall Clock Movement Mechanism with 9.1 Inch Long Spade Hand Battery Operated Repair Parts Replacement, 4/5 in Total Length

#ad
HILLHOME #ad - Accurate time-keeping motor:size-total shaft length is 20 mm 4/ 5 inch, thread length is 11. 7 mm 9/ 20 inches; suitable for 4 - 8 mm 4/ 25 - 3/ 10 inch thickness clock panel; Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability; powered by a AA battery.

The simple style clock movement can match to diverse colors, it will not stand out, patterns, drive long clock hands 10 mm to 450 mm, with 230 mm/ 9.11 inch long hand to fit dials up to 56 cm/ 22 inches in diameter. Compatible clock: applicable to cross-stitch, three-dimensional embroidery, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, craft clock, etc.

Instructions - Included along with the movements. Size from the center of the hole to the tip: the hour hand is approx. 175 mm/ 6. 9 inches long; the minute hand is about 230 mm/ 9. 1 inches in length. High torque clock movement with metal hook: i shaft, shapes clock panel, replacing or making a clock by yourself. Warm notice: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before buying.
BrandHILLHOME #ad
ManufacturerHILLHOME #ad

7. Satisfounder

#ad

Satisfounder Non-Ticking Hands Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement with 3 Different Pairs of Hands 1/4 Inch Shaft Length

#ad
Satisfounder #ad - Three of most popular clock hands. Package contents: a clock movement, 3 minute hands, a metal hook, 3 brass washers and 3 Brass nuts, 3 Hour hands, 3 Plastic washers, 3 Second hands, come with the specially designed protect box. Meet different needs only in one package.

Size: total shaft length is 13 mm 1/2 inches, thread length is 6 mm 1/4 inches; Sweep second movement, suitable for 1 -4 mm 1/ 25 - 5/32 inches thickness clock panel. Please choose the right size according to picture 2 before purchase. The simple style clock movement can match to diverse colors, it will not stand out, good for repairing, good movement will work well. Different size, color and styles. High torque movement: long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands2 black and 1 white, patterns, shapes clock panel, replacing or making a clock by yourself.

Compatible clock: applicable to cross-stitch, three-dimensional embroidery, and especially suitable for DIY quartz wall clock replacement movement parts, craft clock, frameless draw clock, etc. The diameter of clock Panel should be more than 230mm / 9. 06in. The clock hands should be less than 230mm / 9. 06in.
BrandSatisfounder #ad
ManufacturerSatisfounder #ad
Height0.67 Inches
Length2.2 Inches
Width2.2 Inches

8. Hicarer

#ad

Shaft Length 1/10 inches/ 23 mm Shaft Length, High Torque Quartz Clock Movement Clock Replacement Mechanism with 12 Inch Long Spade Hands for DIY Clock Black

#ad
Hicarer #ad - Size from the hole center to the tip: the hour hand is approx. Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure, otherwise they will be bent.

203 mm/ 8. 0 inches long; the minute hand is about 305 mm/ 12 inches in length. Package contents: 1 clock movement with hook, 2 hands and some mounting hardware, coming with specially designed cardboard box and instructions. Total shaft length: 23 mm 1/ 10 inches, with thread length 11. 7 mm 9/ 20 inches, jump second movement suits for 4-8 mm 4/ 25-3/ 10 inches thickness clock panel. Clock movement details: high torque clock movement replacement with hook, long shaft, drive long clock hands 10 mm to 450 mm.
BrandHicarer #ad
ManufacturerHicarer #ad
Part NumberHicarer-Clock Movement-01

9. VOSAREA

#ad

Vosarea Silent Quartz DIY Wall Clock Movement Mechanism Non-Ticking Repair Parts Replacement Kit with 2 Pair Hands, Battery Operated Black, Clock Quartz Movement

#ad
VOSAREA #ad - Uesage: replacement clock mechanism for repairing, craft clock, three-dimensional embroidery, frameless draw clock, replacing or making a clock. The time can be set by turning the time-set knob on the back of the clock movement.

Clock hand size: second hand : about 130mm, 124mm. Battery powered clock mechanism: insert a fresh "AA" battery not included and your clock will beginto keep time. Minute hand : about 100mm, 90mm. Applicable to cross-stitch, etc. 2 pair hand quartz clock movement: Two styles clock hands kit, easy for installation, simple and elegant design. Hour hands length: about 76mm, 150mm. Quartz movement replacement package including: a clock movement, 2 x Hour hand, 2 x Minute hand, a Plastic washer, a Brass washer and a Brass nut, 2 x Second hand, come with the specially designed protect box and instructions.
BrandVOSAREA #ad
ManufacturerVosarea #ad
Height1.69 Inches
Length2.17 Inches
Weight0.07 Pounds
Width2.17 Inches
Part Number54JBL1290VG

10. TIKROUND

#ad

4/5 Inch Total Shaft Length., TIKROUND Original Youngtown 12888 Pendulum Type Movement Step Clock Accessory Quartz DIY Movement Kits,5/16 Inch Maximum Dial Thickness

#ad
TIKROUND #ad - Applicable to cross-stitch, frameless draw clock, three-dimensional embroidery, craft clock, etc. Instructions - Included along with the movements. Package includes 2 pieces of minute hands, 2 second hands, 1 second cap and mounting hardware kits, easy for installation; Simple and elegant design, 2 pieces of hour hands, these replacement parts suit well to different styles of clock frame.

Young town manufactures the 12888 series in various models, Please check the dimensions of this movement prior to purchase to verify the dimensions. Pendulum type step movement, suitable for 4-8 mm 5/32 - 5/16 inch thickness clock panel, total shaft length is 20mm(4/5 inch), thread length is 11.7 mm 9/20 inch. Max pendulum swing: 26°;max pendulum Weight: 40g ; Max Pendulum Length: 35cm. Good for repairing, replacing or making a clock.
BrandTIKROUND #ad
ManufacturerTIKROUND #ad
Weight0.09 Pounds
Part NumberTIKROUND-M-047